Operation Manual

Security functions
SmartCard SystemLock (optional)
With SystemLock enabled, th e device c an only be started using an initialised SmartCard (SICRYPT,
CardOS or Fujitsu) and a personal identification number (PIN). The SmartC a rd and PIN are
checked during system booting in the BIOS, i.e. b efore the operating system is started.
SmartCard SystemLock
Item Specific Help SmartCard SystemLock Not Installed
Install Single PC: [Enter]
Install Group PC: [Enter]
Installs the security
for this PC, and
creates a new
SystemLock Admin
SmartCard dedicated to
this PC.
SmartCard data will be
overwritten.
A correct SmartCard is
required for a
permanent installation
SmartCardSwitchingonthe
system
All new SmartCards have a preset PIN (Personal Identification Number)
and PUK (Personal Unblocking Key).
On SICRYPT and CardOS SmartCards, the value 12345678 is preset
for the PIN and the PUK.
On Fujitsu cards, the value 0000 is preset for the PIN and the value
administrator is preset for the PUK. For security reasons, we recommend
that you change both PIN and PUK w ithout fail.
Additional software (e.g. Smarty) is required so that the system can also check that
the correct SmartCard is inserted while the system is running.
You will find information on how to uninstall SystemLock under "Uninstalling S ystemLock".
A system which was protected using System Lock can no longer be released.
Always create a backup copy of the SmartCard which was used.
Fujitsu Technology Solutions 83