Operation Manual

Security functions
New SmartCards h ave a preset PUK (see above).
if you want to re-initialise a previously initialised SmartCard, you will need
to know the PUK which was a ss igned to it.
► Enter the PUK.

When the following appears:
• ACCESS DENIED = You have entered a n invalid PUK. After six failed attempts,
the SmartCa rd will be blocked and can no longer be used.
► Enter a new PIN at the following prompt:

Enter new PIN:
Confirm new PIN:
A number with 4 to 8 digits is acceptable for the new PUK. For security
reasons, we recommend that you change the P UK for every SmartCard,
and use an 8-digit number each time.
► Re-enter the new PIN to confirm.

When the following appears:
• PIN/PUK do not m atc h = You have confirmed the PIN inc orrectly. You will b e
requested to re-enter the new PIN and reconfirm.
Please wait a few seconds after confirming the new PIN: SystemLock is being installed.
The following messa ge will be displayed if installation is successful:
Setup Notice
Changes have been saved
[Continue]
► Now press the Enter key. The SystemLock administration menu will be displayed:
Fujitsu Technology Solutions 87