Operation Manual

Security functions

Carrying out administrator f unctions

If you h ave an internal SmartCard reader, you can switch on the device by i nserting the SmartCard.

If you switch on the device with the On/Off switch then the following message appears:

SystemLock

Insert a SmartCard.

Administrator functions

► Insert the Admin SmartCard. T he following m essage will be displayed:



EnteryourPIN:

You can now select:

F2=Setup, F3=Change PIN, F4=Administration

► Press the

function key. The following message will be displayed:



Enter the PUK:

► If you have entered the PU K correctly, you receive the following me ssage:



PUK OK.

Initialize another SmartCard or press ESC to abort?

F5=User, F6=SuperUser, F7=Admin, F8=Service, F9=Unblock SmartCard, F10=Uninstall

: Normal User SmartCard ("System" access rights):

Only allows system start-up, does not allow changes in BIOS Setup.

: Extended User SmartCard ("System and Setup" access rights):

Allows system start-up and changes in BIOS Setup.

: Admin SmartCard ("Admin" access rights):

Allows generation of further Admin SmartCards.

: Service SmartCard ("Service" access rights):

Only allows changes in BIOS Setup.

: Re-activate a blocked User SmartCard.

Enables a new user PIN entry.

F10

: Uninstalls S ystemL ock.

Additional SmartC ards should be produced either as Normal User SmartCards

("System") or as Extended User SmartCards ("System and Setup"). These

then have restricted access to the device.

► Press the desired function key. The following message will be displayed:



Remove the SmartCard.

► Remove the Admin SmartCard.



Insert a SmartCard.

Keep the Admin SmartCard in a safe place and protect it from unauthorised access.

Fujitsu Technology Solutions 91