Operation Manual

Removing and installing com po nents
during servicing
Attaching the cover
1
2
► Place the cover
in the correct mounting position (1).
► Tighten the screw (2).
Finishing component removal
After you ha
ve removed or changed the system components a s you required, please
prepare you
r device for operation again as follows:
► Install th
e battery again (se e "
Installing a battery", Page 53).
► Turn the notebook the right way up ag ain and place it on a flat surface.
► Reconnec
t the cables that you disconnected b efore.
112 Fujitsu Technology Solutions