Operation Manual

First-time s etup of your device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OFF switch f or wireless components: Slide the ON/OFF switch
for wireless components to the O N position before s witching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set a side enough time for it to be fully completed and connect
the device to the ma ins using the mains adapter.
During the installation process, DO NOT restart the d evice unless
you are requested to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
1
► Slide the ON/OFF switch (1) to the right to sw itch on the notebook.

The ON/OFF switch returns automatically to its original position.
► During installation, follow the instructions on screen.
If a Windows operating system is i nst alled on your device, you will find more
information on the system and drivers, help pro grammes, updates, m anuals etc.
on the device or on the Internet at "
http://ts.fujitsu .com/support".
18 Fujitsu Technology Solutions