Operation Manual

Working with the notebook
Virtual numeric keypad
NumerickeypadVirtualnumerickeypadNumLock
To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual
numeric keypad. The special k eys of the virtual numeric keypad are recognisable by the numbers
and symbols printed in the upper right corner of each key. If you have switched on the virtual
numeric keypad, you can output the characters shown on the upper right of the keys.
The keyboard layout sho wn below may differ from your actual device.
1 = Valid characters when the
Num
key is not activated
2 = Valid characters w hen the
Num
is activated
Furthe
r information about the status indicators can be found in chapter "
Status indicators", Page 19.
Country and keyboard settings
If you want to change the country and keyboard settings, proceed as follows:
► Enter the setting s by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options.
Key combinations
The key combinations described below a pply w hen u sing M icrosoft W indows
operating systems. Some of the following key combinations may no t function in
other operating systems or with certain device drivers.
Key combinations are entered as follows:
► Press the first key in the combination and keep it pressed.
► While holding the first key down, press the other key o r keys in the combina tion.
Fujitsu Technology Solutions 43