Operation Manual

Security functions
Password protection f or the hard disk
Passwordprotect ion:
The had disk password prevents unauthorised access to t he hard disk drives
and is checked internally each time the system is booted. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
► Call up the BIOS Setup and select the Security me nu.

If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if desired (see "
Securit y functions", Page 76 ).
► Mark the Hard D isk Security field and press the Enter key.
► In the D rive0 area mark the Set Master Password field and press the Enter key.

Enter new Password then appears and you are asked to enter a password.
► Enter the password and press the Enter key.

Confirm new Password requires you to confi rm the password.
► Enter the passwo rd again and press the Enter key.

Setup Notice: Changes have been saved is displayed to confirm t hat the
new password has been saved.
► To assign the pa ssword for the second hard disk (Drive 1), go to the Drive1 area and
select the field Set Master Password, then proceed in exactly t he same way as for
setting up the password for the first hard disk (Drive0).

The field Password E ntry on Boot is set to Enabled by defa ult. You can exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.

The notebook reboots and your hard disk is now protected with a password. The system
will ask you to enter the password when t he notebook is restarted again.
Deactivating hard disk protection
To cance l a password without set ting a new one , proceed as follows:
► Call up the BIOS Setup and select the Security me nu.
► Mark the Hard D isk Security field and press the Enter key.
► In the D rive0 area mark the Set Master Password field and press the Enter key.

You will be initially requested to enter the old password by the Enter current Password prompt.
Yo u will then be requested to enter a new password by the Enter new Password prompt.
► After entering the password, press th e Enter key three times.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.

The notebook reboots, and passwo rd protection for the hard disk is cancelled.
► To cancel th e password for the s econd hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same wa y as
for cancelling the password for the first hard disk (Drive0).
Fujitsu Technology Solutions 81