Operation Manual

Security functions
Installing Sys temLock
InstallingS yst emLock
During initial installation, the first SmartCard becomes the Admin SmartCard. Together with
the PUK, it has all access rights, and should therefore be kept in a safe place. It can only
be used by the authorised user (administrator), e.g. to initialise user cards.
You need an Admin SmartCard if you want to set up a user group. You use the
Admin SmartCard to add further systems to th e user group.
Setting up the fi rst system in a user group or a stand-alone
system for use with SystemLock
Usergroups
► Start th e device and call up BIOS Setup.
► From the Sec urity menu, choose the option SmartCard SystemLock.

The following S martCa rd SystemLock m enu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Not Installed
Install Single PC [Enter]
Install Group PC [Enter]
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
required for a
permanent installation.
Enter PIN: [ ]
► Insert a new SmartCard in the reader and press En ter.
86 Fujitsu Technology Solutions