Operation Manual

Security functions
► If you do not want to initialise any furth er SmartCards, press
Esc
and remove the Admin
SmartCard. NEVER write the PIN or PUK on the SmartCard under any circumstances!
Keep the SmartCard and PIN/PUK in a safe place and protect
them from unauthorised access.
Adding a system to a user group
SystemLock2
► Start the device.
► Call up BIOS Setup and select the SmartCard SystemLock page from the Security menu.

The following Smart C ard SystemLock menu w ill be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Not Installed
Install Single PC [Enter]
Install Group PC [Enter]
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
required for a
permanent installation.
Enter PIN: [ ]
► Insert the Admin SmartCard for th e user group.

Enter PIN:
► Enter the PIN.

When the f
ollowing appea rs:
• ACCESS D ENIED = You have con firmed the PIN incorrectly. You are then requested to
enter and con firm the new PIN again. After three failed a ttempts, the Smart Card will
be blocked and can then only be activated again by entering th e PUK.
Enter th
ePUK:
Fujitsu Technology Solutions 89