Operation Manual

Working with the notebook
Inserting the card
Keep the placeholder for the slot in a safe place. When you remove the card again y ou
must reinstall the placeholder. This prevents foreign bodies fro m getting into the slot.
1
2
► If the eject button (1) is recessed, press it
once so that it disengages. Now press the
eject button ag ain so that the placeholder
protrudes slightly from the notebook.
► Pull the card placeholder out of the slot (2).
2
► Insert the card into the slot guide with
the connection contacts first.
► Gently push th e card into the slot either
until it will go no further or you fe el it
engage. Do not use excessive force.
Depending on the type, the card may
protrude slightly from the slot.
Please see the documentation relating to the card for driver installation instructions.
Fujitsu Technology Solutions 67