Operation Manual

Working with the noteboo k
Connecting the notebook to the Port R eplicator
If yo u connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the noteboo k beforehand.
The mains adapter must b e connected to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the not ebook is not operated with the LCD screen closed when
the notebook is connected to the Port Rep licator. The resulting overheating can
cause reduced performance and increased activity of the integrate d fan.
PortReplicator
► Switch the notebook off.
► Remove the mains plug for the mains adapter from the mains socket.
► Disconnect the mains adapter cable from the D C socket (DC IN) of the note book.
The Port Replicator must be adjusted to the size of your notebook. To
do this, the device marked in grey in the diagram must be moved from
position A to position B o n the P ort Replicator:
2
3
1
1
► Hold the device at the positions marked with (1 ).
► Slide th e device in the d irection of the arrow (2) first slightly to the left and then
away f rom yourself until it engages in position B.
► Place the notebook onto the P ort Replicator (3) and ensure that it locks into place correctly.
74 Fujitsu Technology Solutions