System Operating Manual LIFEBOOK U5x4
Congratulations on your purchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. can be found on the Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.
Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2013. All rights reserved. Publication Date 07/2013 Order No.
LIFEBOOK U5x4 Operating Manual Innovative technology 7 Ports and controls 9 Important notes 13 First-time setup of your device 16 Working with the notebook 19 Security functions 37 Connecting external devices 41 Settings in BIOS Setup Utility 45 Troubleshooting and tips 47 Technical data 54 Manufacturer’s notes 55 Index 61
Remarks Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions. Trademarks Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Access via UMTS/LTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 36 Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Security Lock . . . . . . . . . . . .
Contents Regulatory information for notebooks without radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DOC (Industry CANADA) notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC regulatory information for notebooks with radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 57 59 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Fujitsu
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarise yourself with these components before you start to work with the device.
Ports and controls Front with LCD screen without touch function 12 3 4 9 5 7 8 6 1 2 3 4 5 10 = = = = = WebCam LED WebCam Microphone Keyboard ON/OFF switch 6 7 8 9 = = = = Loudspeakers Touchpad Touchpad buttons Status indicators Fujitsu
Ports and controls Left panel 1 2 3 4 1 = Security Lock device 2 = HDMI port 3 = USB port (USB 3.0) 4 = USB port with charging function (Anytime USB charge, USB 3.0) Right-hand side 1 1 = Headphones port 2 = USB port (USB 2.
Ports and controls Bottom 1 1 = Reset key 12 Fujitsu
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety notes Notes Safetynotes Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Energy saving Energysaving Energy Notes Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment.
Important notes Notebook: transporting Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a car). ► ► ► ► ► ► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives. Switch the notebook off. Unplug the mains adapter and all external devices from the power socket. Disconnect the mains adapter cable and the data cables for all external devices. Close the LCD screen.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 13. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 17.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch for wireless components to the ON position before switching on the device. When you switch on the device for the first time, the supplied software is installed and configured.
Working with the notebook Working with the notebook Notebook Notebook,operation This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 41 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 13.
Working with the notebook Status indicators Description Radio components indicator • The indicator is illuminated: The radio components are switched on. • Indicator is off: The radio components are switched off. Power-on indicator/Standby • The indicator is lit: The notebook is switched on. • The indicator flashes: The notebook is in standby mode. • The indicator is not lit: The notebook is switched off.
Working with the notebook Notebook: switching off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. Notebook ► Close the LCD screen.
Working with the notebook Keyboard Keyboardkeypad Numeric Buttons The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows.
Working with the notebook Key Description Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Linefeed Enter Return Enterkey Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area.
Working with the notebook Virtual numeric keypad Numeric Num Virtualnumerickeypad Lock keypad To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key. If you have switched on the virtual numeric keypad, you can output the characters shown on the upper right of the keys.
Working with the notebook Combination Description Switching the loudspeakers on and off This key combination switches your notebook’s loudspeakers off and on. Loudspeakers Fn+F3 Switching the mouse and touchpad function on/off This key combination enables and disables the mouse and touchpad. Touchpadbuttons Touchpad Fn+F4 Switching the wireless components on and off This key combination switches the radio components on or off.
Working with the notebook Combination Description Switch between open applications Use this key combination to switch between several open applications. Alt+Tab Ctrl + Alt + Del Windows security/Task-Manager This key combination opens the Windows security/Task Manager window. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab stop. Backtab Shift+Tab Key combinations using the Windows keys are detailed in the manual for your operating system.
Working with the notebook Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids and grease. Touchpad Do not use the touchpad if your fingers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons. 1 = Touchpad 2 = Touchpad buttons 1 2 The touchpad enables you to move the mouse pointer on the screen. The touchpad buttons allow you to select and execute commands. They correspond to the buttons on a conventional mouse.
Working with the notebook Dragging items ► Select the desired item. ► Press and hold the left button and drag the item to the desired position with the finger on the touchpad. The item will be moved. Touchpad Switching the Touchpad on and off You can switch the Touchpad on and off using a key combination, see "Key combinations", Page 24.
Working with the notebook Using fingers This function is available as an option on Touchscreen systems. You can use your finger on the touch screen of your device to execute commands and start applications. Action Tapping Tap and hold Dragging Stroke or slide Double-tap Zoom in/Zoom out Input fields Description ► Tap on a symbol, menu, button or folder to select this option or to activate it. ► Tap on a button and let your finger stay there longer until the action is taken.
Working with the notebook Webcam Webcam Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. The WebCam has its own status indicator. The indicator lights up when the WebCam is switched on. The WebCam is switched on and off using the key combination for the WebCam, see "Key combinations", Page 24. • • • • The picture quality depends on the lighting conditions and the software being used.
Working with the notebook Using the power-management features Battery Power The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats Your notebook supports the following formats: • • • Secure Digital (SDTM card) SDHC SDXC Inserting the memory card ► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged.
Working with the notebook Loudspeakers and microphones Bass loudspeaker (subwoofer) Loudspeakers Microphone Volumecontrol Information on the exact position of the speakers and microphone can be found in "Ports and controls", Page 9. Please refer to chapter "Key combinations", Page 24 for information on setting the volume and also enabling/disabling the loudspeakers using key combinations. If you attach an external microphone, the built-in microphone is disabled.
Working with the notebook SIM card Follow the instructions supplied by the provider of the SIM card. Inserting the SIM card ► Remove the cover of the SIM card slot. ► Slide the SIM card into the slot, with the contacts facing upwards, until you feel it engage. ► Close the cover of the SIM card slot.
Working with the notebook Removing a SIM card ► Remove the cover of the SIM card slot. ► Press on the edge of the SIM card so that it jumps up slightly out of the slot. ► Pull the SIM card out of the slot in the direction of the arrow. ► Close the cover of the SIM card slot.
Working with the notebook Wireless LAN/Bluetooth/UMTS/LTE radio components The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the key combination Fn + F5 to start the WirelessSelector. The wireless component indicator will illuminate when one or more wireless components are switched on.
Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
Security functions Configuring password protection in BIOS Setup Utility Before using the various options for password protection in the BIOS Setup utility to increase data security, please observe the following: Make a note of the passwords and keep them in a safe place. If you forget your supervisor password you will not be able to access your notebook. Passwords are not covered by your warranty and a charge will be made for assistance.
Security functions Changing the supervisor or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. User password Supervisorpassword Password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment.
Security functions Password protection for the hard disk Passwordprotection: The had disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Activating hard disk protection ► Call up the BIOS Setup and select the Security menu.
Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 13 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices HDMI port HDMIport The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable.
Connecting external devices USB port with charging function (Anytime USB charge) USBchargingfunction It is recommended that the notebook be operated with the power supply connected whenever the USB port with charging function is in use, as this function will drain the battery more quickly if an external USB device is being charged.
Connecting external devices Headphone port Connectingaudio devices Connectingheadphones Audioports You can connect headphones or external loudspeakers to your notebook via the headphone port. ► Connect the audio cable to the external device. ► Connect the audio cable to the headphone port of the notebook. The internal loudspeakers are disabled. If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket".
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Setup Configuration,BIOSSetupUtility Hardwareconfiguration settings,BIOSSetupUtility configuration The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Using the reset key If the device is no longer responding and no longer responds to the on/off switch, use the reset key to switch the device off. ► Disconnect the device from the mains adapter. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening of the reset key to switch the system off. ► Connect the mains adapter to the device again. ► Switch the device on again.
Troubleshooting and tips The notebook’s date or time is incorrect Summer Buffer Dateisincorrect Incorrectdate/time Timenotcorrect Time,daylightsavings battery,load time Cause Time and date are incorrect. If the time and date are still set incorrectly after switching on the notebook. Troubleshooting ► With the BIOS-Setup-Utility, you can set the date and time in the main menu. ► Please contact your sales outlet or our Hotline/Service Desk.
Troubleshooting and tips The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Screen output is set to the notebook’s LCD screen The external monitor’s power cable or data cable is not connected properly. Troubleshooting ► Switch the external monitor on. ► Press any key to continue. ► Adjust the brightness of the monitor.
Troubleshooting and tips The notebook cannot be started Notebook Cause The battery is dead. Troubleshooting ► Charge the battery. or The power adapter is not connected correctly. ► Connect the mains adapter to the notebook. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. The notebook stops working Energysaving mode Notebook Cause Notebook is in energy saving mode. An application programme has caused the malfunction. The battery is dead.
Troubleshooting and tips The radio connection to a network does not work Theradioconnectiontoanetwork does notwork Cause The wireless component is disabled. The wireless component is enabled. Despite this, the wireless connection to a network does not work. Troubleshooting ► Switch the radio component on (see "Switching the wireless components on and off", Page 36). ► Check whether the radio connection is switched on via the software.
Troubleshooting and tips Error message/cause Keyboard controller error Keyboard error nn Stuck key Operating system not found Press to resume, to SETUP Resolution ► Switch the notebook off with the ON/OFF switch. ► Wait 3 - 5 seconds and switch on the notebook again. If you are using an external keyboard: ► Check the connection and reboot the notebook. ► Make sure that no key is pressed. ► Check in the BIOS Setup whether your hard disk has been set correctly.
Technical data Technical data Technicaldata LIFEBOOK Technicaldata Temperature Operation 5 °C ... 35 °C Transportation -15 ℃ ... 60 °C Dimensions Width x depth x height (with/without rubber feet) • Device with Touchscreen: 322 mm x 225 mm x 21.5 / 19.5 mm • Device with LCD screen without touch function: 322 mm x 225 mm x 19.5/17.5 mm • without Touchscreen: approx. 1.48 kg Weight (including 4-cell rechargeable battery) • with Touchscreen: approx. 1.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your notebook or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".
Manufacturer’s notes Regulatory notices If there is no FCC logo and also no FCC ID on the device then this device is not approved by the Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.
Manufacturer’s notes This fax modem also complies with fax branding requirements per FCC Part 68. Your telephone company will probably ask you to disconnect this equipment from the telephone network until the problem is corrected and you are sure that the equipment is not malfunctioning. This equipment may not be used on coin-operated telephones provided by your telephone company. Connection to party lines is subject to state tariffs.
Manufacturer’s notes any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Manufacturer’s notes CAUTION: To reduce the risk of fire, use only 26AWG or larger telecommunications line cord. For Authorized Repair Technicians Only CAUTION: For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Manufacturer’s notes Exposure from radio frequency devices. The radiated output power of this radio device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized. When using this device, a certain separation distance between antenna and nearby persons must be maintained to ensure RF exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.
Index Index A A beep sounds every second 49 Acoustic error messages 52 Alt+Tab 26 Anti-theft protection 37 Audio ports 44 B Back tab 26 Backspace 23 Bass loudspeaker (subwoofer) Battery battery life 30 caring for and maintaining charge level 30–31 charging 30 Battery indicator 20 Battery status indicator see Battery indicator 20 Battery status meter 30 Battery symbol see Battery indicator 20 BIOS Setup Utility calling 45 exiting 46 operating 45 protecting with password settings 45 Bluetooth Switching the m
Index Hardware configuration HDMI port 42 45 I Important notes 13 Incorrect date/time 49 Indicator Caps Lock 20 drive 20 Num Lock 20 K Key combinations Keyboard 22 cleaning 15 24 L LCD monitor Decrease brightness 25 LCD screen cleaning 15 difficult to read 49 notes 28 reflected glare 49 remains blank 49 LCD screen is too dark 49 Life, battery 30 Line feed 23 Loudspeakers 33 switch off 25 switch on 25 M Mains adapter connecting 17 setting up 17 Mechanical backup 37 Memory card handling 32 inserting 32 r
Index Regulatory information notebooks with radio device 59 Notebooks without radio device 56 Return 23 S Safety notes 13 Screen no screen display 50 Screen brightness decrease 25 increase 25 Security functions 37 Security Lock 37 Selecting a location 17 Setup see BIOS Setup Utility 45 Shift 23 Shift key 23 Shift+Tab 26 Slot Memory cards 32 Standby indicator 20 Status indicators 19 Summer time 49 Supervisor password changing 39 entering 38 removing 39 Switching on the notebook 20 Switching on for the first
