Operation Manual

First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important note s", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, conn ect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 17.Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various m essages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER s witch off your device during the first-time setup process.
The battery must be securely fi tted and charged if you w ant to operate your device using the battery.
When used on the m ove, the built-in battery provides th e device with the necessary powe r. You
can increase the operating time by using the available energy-saving fu nctions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and c
hecking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTran sport
► Check your d
evice for any visible damage which may have occurred during transportation.
You m a y nee
d the packaging in the future, if you need to transport your device.
16 Fujitsu