Operation Manual

Working with the noteb ook
Virtual numeric keypad
NumerickeypadVirtualnumericke ypadNumLock
To provide the convenience of a numeric keypa d, your keyboard is equipped with a virtual
numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers
and symbols printed in the upper right corner of e ach key. If you have switched on the virtual
numeric keypad, you c an output the characters shown on the uppe r right of the keys.
The keyboard layout shown below may differ from your actual device.
1 = Valid characters when the
Num
key is not act ivated
2 = Valid characters when the
Num
is ac tivated
Furthe
r information about the status indicators can be found in chapter "
Status i ndicators", Page 19.
Key combinations
Keycombi
nations
The following description of key combinations applies to Windows operating systems. Some of the
following key combinations may not function in other operating systems or with certain device drivers.
Other key c ombinations are described in the relevant manuals supplied
with your application programs.
Key combinations are entered as follows:
Press the rst key in the combination and keep it pressed .
While holding the rst key down, press the other key or keys in the combination.
24 Fujitsu