Operation Manual

Working with the noteb ook
Wireless LAN/Bluetooth/UMTS/LTE radio components
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless components on and off
► Press the key combination
Fn
+
F5
to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth

The w ireless component indicator will illuminate when one or m ore wireless
components are switched on.
If you sw itch off the radio components, the Bluetooth and UMTS/LTE modules and
the wireless L AN transmission unit (antenna) are also switched off.
Pay attention to the additional safety notes for devices with radio compo nents
provided in the "Safe ty/R egulatio ns" manual.
Details on using a Wireless LAN can be found in the online help s ystem
included in the Wireless LAN softwa re.
You can obtain m ore information on UMTS from your service provider.
Setting up WLAN access
• Requirement: A W LAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS/LTE
You can purchase the accesso ries for UMTS/LT E reception from your retailer
or your Fujitsu Technology Solutions dealer.
If you have ordere d a UMTS/LTE module, your device will already
be prepared when you receive it.
You will find information on establishing the c onnection with the UMT S /LTE
network in the documentation for the hardware you plan to use.
Your device can connect with the Internet via UMTS/LTE. To do this, use one
of the following types of connection:
• USB dongle
a USB stick with your mobile phone provider’s SIM card
• a mobile end-device (e.g. m obile phone) with Bluetooth connection
• a mobile end-device (e.g. mobile phone) with data cable
36 Fujitsu