System Operating Manual LIFEBOOK U772
Congratulations on your purchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. can be found on the Internet at: "http://www.fujitsu.com/fts/" For automatic driver updates, go to: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.
Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact http://www.fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2012. All rights reserved. Publication Date 10/12 Order No.
LIFEBOOK U772 Operating Manual Innovative technology 7 Ports and controls 9 Important notes 11 First-time setup of your device 15 Working with the notebook 18 Security functions 41 Connecting external devices 46 Removing and installing components during servicing 50 Settings in BIOS Setup Utility 51 Troubleshooting and tips 53 Technical data 60 Manufacturer’s notes 61 Index 62
Remarks Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions. Trademarks Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Your Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ports on the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIFEBOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mains adapter . . . . .
Contents 6 Fujitsu
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device.
Ports and controls Right side 1 2 1 = Memory card slot 2 = USB port 3.
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety notes Notes Safetynotes Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Energy saving Energysaving Energy Notes Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment.
Important notes Travelling with your notebook Mobile operation Notebook Transportation Notes Please observe the points listed below when travelling with your notebook. Before you travel ► Back up important data stored on your hard disk. ► Switch off the radio component for data security reasons. With data traffic via a wireless connection, it is also possible for unauthorised third parties to receive data.
Important notes Cleaning the notebook Do not clean any interior parts yourself; leave this job to a service technician. Only use cleaning products designed for computers. Normal household cleaners and polishes can damage the markings on the keyboard and the device, the paintwork or the notebook itself. Ensure that no liquid enters the notebook. The LCD screen very sensitive to scratches. Only clean the display surface with a very soft, slightly damp cloth. ► Switch the notebook off.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 11. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 16.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime When you switch on the device for the first time, the supplied software is installed and configured. Because this procedure must not be interrupted, you should set aside enough time for it to be fully completed and connect the device to the mains using the mains adapter.
Working with the notebook Working with the notebook Notebook Notebook,operation This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 46 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 11.
Working with the notebook Status indicators Description Battery charging indicator/power connector The charging state of the battery is shown by the rechargeable battery indicator. With mains adapter connected: • • • • The indicator lights up blue: The battery is fully charged. The indicator lights up orange: The battery is charging. The indicator flashes orange: The mains adapter is connected but the battery cannot be charged as the battery is too hot or too cold for charging.
Working with the notebook Switching on the notebook ► Open the LCD screen. Switching on ► Press the ON/OFF switch for about one second to switch the notebook on. The power-on indicator is lit. Notebook: switching off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds.
Working with the notebook Keyboard Keyboardkeypad Numeric Buttons The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows.
Working with the notebook Key Description Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Linefeed Enter Return Enterkey Caps Lock key The Caps Lock key activates uppercase mode. In Caps Lock mode, all of the characters you type appear in upper case.
Working with the notebook Virtual numeric keypad Numeric Num Virtualnumerickeypad Lock keypad To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key. If you have switched on the virtual numeric keypad, you can output the characters shown on the upper right of the keys.
Working with the notebook Key combinations Keycombinations The following description of key combinations applies to Windows operating systems. Some of the following key combinations may not function in other operating systems or with certain device drivers. Other key combinations are described in the relevant manuals supplied with your application programs. Key combinations are entered as follows: ► Press the first key in the combination and keep it pressed.
Working with the notebook Combination Description Toggle monitor output Use this key combination to select which monitor is used for display if an external monitor is connected. Monitor output is possible: • • • only on the notebook’s LCD monitor on the notebook’s LCD monitor and the external monitor at the same time only on the external monitor This setting is useful if you would like a high resolution and a high refresh rate on an external monitor.
Working with the notebook Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids and grease. Touchpad Do not use the touchpad if your fingers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons. 1 = Touchpad 1 2 = Touchpad buttons 2 The touchpad enables you to move the mouse pointer on the screen. The touchpad buttons allow you to select and execute commands. They correspond to the buttons on a conventional mouse.
Working with the notebook Dragging items ► Select the desired item. ► Press and hold the left button and drag the item to the desired position with the finger on the touchpad. The item will be moved.
Working with the notebook LCD screen Notes LCDscreen High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
Working with the notebook Webcam Webcam Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. • • • • The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam). When using the webcam the notebook support must not wobble.
Working with the notebook Rechargeable battery Life,battery Battery Rechargeablebattery When not plugged into a mains socket, the notebook runs on its built-in battery. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles. You can extend the battery life by taking advantage of the available energy saving functions.
Working with the notebook Using the power-management features Battery Power The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats Your notebook supports the following formats: • • SDHC SDXC Inserting the memory card ► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged.
Working with the notebook Loudspeakers and microphones Bass loudspeaker (subwoofer) Loudspeakers Microphone Volumecontrol Information on the exact position of the speakers and microphone can be found in "Ports and controls", Page 9. Please refer to chapter "Key combinations", Page 24 for information on setting the volume and also enabling/disabling the loudspeakers using key combinations. When you connect headphones or external speakers, the built-in speakers are disabled.
Working with the notebook SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or notebook to enable access to a mobile radio network in conjunction with an installed UMTS module. Follow the instructions supplied by the provider of the SIM card. Inserting the SIM card ► Pull out the cover of the SIM card slot (1). ► Slide the SIM card into the slot, with the contacts facing upwards, until it engages (2). ► Push in the cover of the SIM card slot.
Working with the notebook Wireless LAN / Bluetooth / UMTS (optional) The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the key combination Fn + F5 to start the WirelessSelector. The wireless component indicator will illuminate when one or more wireless components are switched on.
Working with the notebook Ethernet and LAN EthernetLAN You can use Ethernet LAN with an LAN adapter which is available as an accessory. You can use it to establish a connection to a local network (LAN = Local Area Network). 1 2 3 ► Connect the LAN adapter to the notebook’s LAN port (1). ► Connect the network cable to the LAN adapter (2). ► Connect the network cable to your network connection (3). Your network administrator can help you to configure and use the LAN connections.
Working with the notebook Your Port Replicator The Port Replicator is a device that helps you to quickly connect your notebook to your peripheral devices, such as a monitor, printer etc. The features offered by the Port Replicator include standard ports for monitor, audio, mouse and keyboard. You need only dock the notebook in order to work with your peripheral devices.
Working with the notebook Connecting the notebook to the Port Replicator The mains adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator. PortReplicator ► Remove the mains plug for the mains adapter from the mains socket. ► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. 1 ► Position the notebook so that it is in line with the back edge of the Port Replicator.
Working with the notebook Connecting the mains adapter to the Port Replicator ► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1). ► Connect the power cable to the mains adapter (2). ► Plug the power cable into the mains socket (3). 1 3 2 When the notebook is connected to a Port Replicator, the operating system creates a hardware profile for the "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output.
Working with the notebook Disconnecting the notebook from the Port Replicator 2 1 ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2).
Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
Security functions Using the Security Lock Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu Technology Solutions recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
Security functions Setting supervisor and user password ► Start the BIOS Setup Utility and go to the Security menu. ► Select the Set Supervisor Password field and press the Enter key. With Enter new Password: you are asked to enter a password. ► Enter the password and press the Enter key. Confirm new Password requires you to confirm the password. ► Enter the password again and press the Enter key. Changes have been saved is a confirmation that the new password has been saved.
Security functions Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 43), you can also prevent booting of the operating system. Operating system Activating system protection ► ► ► ► Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key.
Security functions Trusted Platform Module (TPM) (device-dependent) Trusted Platform Module TPM To use the TPM, you must activate the TPM in the BIOS Setup before the software is installed. The condition for this is that you have assigned at least the supervisor password (see "Security functions", Page 41). Enabling TPM • ► ► ► Requirement: You have assigned a supervisor password, see "Security functions", Page 41. Call up the BIOS Setup and select the Security menu.
Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 11 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit/s. USB 2.0 has a data transfer rate of up to 480 Mbit/s. USB 3.0 has a data transfer rate of up to 5 Gbit/s.
Connecting external devices USB port with charging function (Anytime USB charge) USBchargingfunction It is recommended that the notebook be operated with the power supply connected whenever the USB port with charging function is in use, as this function will drain the battery more quickly if an external USB device is being charged.
Connecting external devices Connecting external audio devices Headphone port Connectingaudio devices Connectingheadphones Audioports You can connect headphones or external loudspeakers to your notebook via the headphone port. ► Connect the audio cable to the external device. ► Connect the audio cable to the headphone port of the notebook. The internal loudspeakers are disabled. If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.
Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Setup Configuration,BIOSSetupUtility Hardwareconfiguration settings,BIOSSetupUtility configuration The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Using the battery switch-off button If the device stops responding and no longer reacts to the On/Off switch, use the battery switch-off button to shut down the device. ► Disconnect the device from the mains adapter. ► Push a pen or a piece of wire (such as a paper clip) firmly into the opening of the battery switch-off button to shut down the system. ► Connect the mains adapter to the device again. ► Switch the device on again.
Troubleshooting and tips The notebook’s date or time is incorrect Summer Buffer Dateisincorrect Incorrectdate/time Timenotcorrect Time,daylightsavings battery,load time Cause Time and date are incorrect. If the time and date are still set incorrectly after switching on the notebook. Troubleshooting ► With the BIOS-Setup-Utility, you can set the date and time in the main menu. ► Please contact your sales outlet or our Hotline/Service Desk.
Troubleshooting and tips The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Screen output is set to the notebook’s LCD screen The external monitor’s power cable or data cable is not connected properly. Troubleshooting ► Switch the external monitor on. ► Press any key to continue. ► Adjust the brightness of the monitor.
Troubleshooting and tips The notebook cannot be started Notebook Cause The battery is dead. Troubleshooting ► Charge the battery. or The power adapter is not connected correctly. ► Connect the mains adapter to the notebook. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. The notebook stops working Energysaving mode Notebook Cause Notebook is in energy saving mode. An application programme has caused the malfunction. The battery is dead.
Troubleshooting and tips The radio connection to a network does not work Theradioconnectiontoanetwork does notwork Cause The wireless component is disabled. The wireless component is enabled. Despite this, the wireless connection to a network does not work. Troubleshooting ► Switch the radio component on (see "Switching the wireless components on and off", Page 35). ► Check whether the radio connection is switched on via the software.
Troubleshooting and tips Error message/cause nn Stuck key Operating system not found Press to resume, to SETUP Resolution ► Make sure that no key is pressed. ► Check in the BIOS Setup whether your hard disk has been set correctly. ► Make sure that the operating system is installed on the corresponding drive. ► Press the F1 function key to start the operating system. ► Press the function key F2 to access the BIOS Setup.
Technical data Technical data Technicaldata LIFEBOOK Technicaldata Ambient conditions Operating temperature Dimensions Width x depth x height Weight Main memory Slots Approved memory modules 5 °C – 35 °C 327 mm x 225 mm x 15.9 mm (17.6 mm with rubber feet) Approx. 1.46 kg 1 slot 204-pin DDR3-1333/1600 SO-DIMM with a max. total of 8 Gbyte RAM 2 Gbyte, 4 Gbyte or 8 Gbyte DDR3-1333/1600 SO-DIMM The data sheet for the device provides further technical data.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your notebook or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".
Index Index A A beep sounds every second Alt + Tab 25 Anti-theft protection 42 Audio ports 49 B Back tab 25 Backspace 22 Bass loudspeaker (subwoofer) 33 Battery battery life 30 caring for and maintaining 30 charge level 30–31 charging 30 Battery indicator 18 see Rechargeable battery indicator Battery status indicator see Battery indicator 18 Battery status meter 30 Battery symbol see Battery indicator 18 see Rechargeable battery indicator BIOS Setup Utility calling 51 exiting 52 operating 51 protecting wi
Index I Important notes 11 Incorrect date/time 55 Indicator Caps Lock 19 drive 19 Num Lock 19 Scroll Lock 19 cannot be started 57 cleaning 14 stops working 57 switching off 20 transporting 13 using 18 Notebook, operation 18 Notes 11 cleaning 14 disposal / recycling 61 energy saving 12 LCD screen 28 Safety 11 transport 13 Num Lock indicator 19, 23 Numeric keypad 21 see Virtual numeric keypad K Key combinations 24 Keyboard 21 cleaning 14 Keyboard backlighting switch off 24 switch on 24 L LCD monitor Decrea
Index Rechargeable battery 30 see Battery 30 Rechargeable battery indicator Return 22 Time, daylight savings 55 Tips 53 Toggle monitor output 25 Touchpad 24, 26 buttons 26 cleaning 14 dragging items 27 executing commands 26 moving the pointer 26 selecting an item 26 switch off 24 Touchpad buttons 24 TPM 45 Transport Transport damage 15 Transportation 13 Travel, notebook 13 Troubleshooting 53 Trusted Platform Module 45 19 S Safety notes 11 Screen no screen display 56 Screen brightness decrease 24 increas
