Operation Manual

Working with the notebook
Wireless LAN / B luetooth / UMTS (optional)
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for th is device.
Switching the wireless components on and off
► Press the key combination
Fn
+
F5
to start the Wi relessSelector.
WirelessLANWirelessLANBluetoothBluetooth

The wireless component indicator will illuminate when on e or more wireless
components are switched on.
The Bluetooth m odu le and the wireless LAN transmission unit (antenna) will all
be switched off when you switch off the radio components.
Pay attention to th e additional safety notes for devices with wireless
components provided in the "Safety" manual.
Details on using a Wireless LAN can be found in the online help system
included in the Wireless LAN software.
Setting up WLAN access
• Requirement: A W LAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS
You can purchase the accessories for UMTS reception from your retailer
or your Fujitsu Technology Solutions dealer.
If you ha ve ordered a UMT S module, your device will already be
prepared when you receive it.
You will find information on establishing the connection with the UMTS
network in the documentation for th e hardware used.
Your device can connect w ith the Internet via UMT S. To do this, use one of
the following types of connection:
• USB dongle
a USB stick with y our mobile phone provider’s SIM card
• a mobile end-device (e.g. mobile phone) with Bluetooth connection
• a mobile end-device (e.g. m o bile phone) with data cable
Fujitsu 35