Operation Manual

Security functions
Setting supervisor and user password
► Start the BIOS Setu p Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.

With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter key.

Confirm new Password requires y ou to confirm the password.
► Enter the password again and press the Enter key.

Changes have been saved is a confirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.

If you do not want to change any other settings, you can exit BIOS Setup Util ity.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisor pas swor
d
Userpassword

The notebook will be rebooted and the new password will come into effect. It will now be
necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility.
Please note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Se tup Utility with the supervisor password.
PasswordSupervisorpasswordUser password
► Call the BIOS Setup Utility and go to th e Security menu.
► When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a ne w password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setu p Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.

Yo u will be requested to enter the current password by the Enter Current Password prompt.
Yo u w ill be requested to enter a new password by the Enter New Password prompt.
► Press the Enter ke y twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.

The notebook will now reboot with the passw ord re m ove d.
Removing the supervisor password simultaneously deactivates the user password.
Fujitsu 43