Operation Manual

Troubleshooting and tips
Using the battery switch-off button
If the device stops responding and no longer reacts to the On/Off switch, use the
battery switch-off button to s hut down the device.
► Disconnect the device from the mains adapter.
► Push a pen or a piece of wire (such as a paper clip) firmly into the opening of
the battery switch-off button to shut down the system.
► Connect the mains adapter to the device again.
► Switch the d evice on again.
Restoring the hard disk contents under Windows
Harddisk:Operatingsystem,restoring
To perform the following steps, you must connect an external optical
drive (available as an option) to the device.
You c an use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities
CD/DVD" to reinstall the operating system.
The instructions are provided on the case o f the Recovery CD.
During the r einstall process your perso nal files and any installed programs
will be deleted. We advise yo u to backup your files to an external hard
drive, or CD / DVD disk before you start.
► Switch the notebo ok on.

The followin
g display briefly appears on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appears, press the function key
F12
.
► Insert the
"Windows Recovery CD" into the optical drive.
► Select CD-ROM and press the Enter key.
► Follow th
e i nst ructions on the screen.
After the installation you must install all the drivers again. Some installed hardware
components will not be correctly sup ported until this has been done.
► Insert the "Drive rs & U tilities" CD/DVD into the optical drive. Th e CD starts automatically.
► Click o
ntheDesk Update button.
► Select Automatic d r iver installation (Express) and click on Start installation.
► Follo
w the instructions on the screen.
► Restart your notebook when the driver installation is completed.
54 Fujitsu