Operation Manual

Troubleshooting and tips
Error message/cause Resolution
nn St uck key
► Make sure that no key is pressed.
Operating system not found
► Check in the BIOS Setup whether
your hard
disk has been set co rrectly.
► Make sure that the operating system is
installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the s elf-test before starting the operating
system.
► Press the
F1
function key to start the
operating system.
► Press the function key
F2
to access the
BIOS Setup.
Previous boot incomplete - Default configuration
used Due to an error during the previous system
boot, default values were used for certain
settings. Check the settings in the BIOS Setup.
► Press the
F1
function key when prompted
to do so.
Real time clock error
► Contact your sales ou tlet or our customer
service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
► Contact your sales ou tlet or our customer
service centre.
System battery is dead - Replace and run SE TU P
► Contact your sales ou tlet or our customer
service centre.
System cache error - Cache disabled
► Contact your sales ou tlet or our customer
service centre.
System timer error
► Contact your sales ou tlet or our customer
service centre.
Fujitsu 59