Operation Manual

First-time setup of your d evice
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 10.
If your device is equipped with a Windows operating s ystem, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefi rst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 14.Themains
adapter must be connected during the en tire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery must be securely fitted and charged if you want to operate your device using the battery.
When used on the move, the built-in ba ttery provides the device with th e necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to conn ect external devices (e.g. mouse, printer) to your
device, please refer to the operating ma nual f or your device.
Unpacking and c
hecking the device
Should you discover any damage th at occurred during t ransportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTran sport
► Check your d
evice for any visible damage which m ay have occurred during transportation.
You may nee
d the packaging in the fu ture, if you need to transport your device.
Fujitsu 13