Operation Manual

Troubleshooting and tips
Using the reset key
If the device is no longer responding and no longer responds to the on/off
switch, use the reset key to switch the device off.
► Disconnect the device from the mains adapter.
► Push a pen or a piece of wire (such as a paperclip) firm ly into the opening of
the reset key to switch the system off.
► Connect the mains adapter to the device again.
► Switch the d evice on again.
Restoring the hard disk
contents under Windows
Harddisk:Operatingsystem,restoring
To perform the following steps, you must connect an external optical
drive (available as an option) to the device.
You c an use the "Wind
ows R ecovery CD" (optionally available) and the "Drivers & Utilities
CD/DVD" to reinsta
ll the operating system.
The instructions a
re provided on the case of the Recovery CD.
During the r einst
all process your personal files and any installed programs
will be deleted.
We advise you to backup your files to an external hard
drive, or CD / DV
D disk before you start.
► Switch the notebo ok on.

The following display briefly appears on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appears, press the function key
F12
.
► Insert the "W indows Recovery CD" into the optical drive.
► Select CD-ROM and press the En ter key.
► Follow the inst ructions on the screen.
After the installation you must install all the drivers again. Some installed hardware
components will not be correctly sup ported until this has been done.
► Insert the "Drive rs & U tilities" CD/DVD into the optical drive. Th e CD starts automatically.
► Click on the De sk Update button.
► Select Automatic d river installation (Express) and click on Start installation.
► Follow the inst ructions on the screen.
► Restart your notebook when the driver installation is completed.
44 Fujitsu