User's Manual

Settings
109
◆ Adding Wi-Fi network
Enter network SSID or security information to add Wi-Fi
network manually.
･ Set Wi-Fi to ON in advance.
1
From the Home screen, → [Settings] → [Wi-Fi]
→ [Easy Settings/Select network]
2
[MENU] → [Add network]
3
Enter a network SSID of Wi-Fi network to add
→ Select security
･ Security can be set to [None], [WEP], [WPA/WPA2 PSK]
or [802.1x EAP].
4
Enter additional security information as
required
→ [SAVE]
◆ Deleting Wi-Fi network connecting
information
1
From the Home screen, → [Settings] → [Wi-Fi]
→ [Easy Settings/Select network]
2
Select the connected Wi-Fi network →
[FORGET]
◆ Wi-Fi Easy Settings
You can connect through simple operations when connecting
via a Wireless access point supporting AOSS
 and WPS
connection.
･ Set Wi-Fi to ON in advance.
1
From the Home screen, → [Settings] → [Wi-Fi]
→ [Easy Settings/Select network]
2
[EASY SETTINGS]
3
Select a registration method
AOSS  system : [AOSS system] → Tap [AOSS] button →
Perform operations on the access point → On the
connection complete screen, [Finish]
WPS system : [WPS system]
→ [Push button system]/[PIN
entry system (8 digits)]/[PIN entry system (4 digits)]
→
Perform necessary operations on the access point
･ In case of push button method, press a dedicated button
on an access point. In case of PIN entry method, enter
PIN code displayed on the terminal to an access point
device and tap [OK].
✔ INFORMATION
･ For some wireless LAN access points, AOSS  connection
may not be established. If connection is failed, use WPS
connection or connect manually.
･ When security on the wireless LAN access point is set to WEP,
you cannot connect in WPS system.