User's Manual

Settings
112
Passpoint : Set whether to automatically connect the
available Passport access point when Wi-Fi is ON.
◆ Data usage
You can enable Internet access via mobile network, set limit of
mobile data communications on graph or set alert when usage
exceeds the limit.
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
→ [Data usage]
2
Set [Cellular data] to ON
Data usage managing screen appears and mobile data
communication volume (estimate) per period or per
application is displayed.
･ To restrict volume of data usage, set [Set mobile data
limit] to ON.
･ Tap [MENU]→[Restrict background data]→[OK] to
restrict data communication in background.
◆ Stopping packet connection
Some applications automatically perform packet
communications. Packet communication is kept active unless
you cut off the connection or the time-out occurs. Activate or
deactivate packet communication as required.
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
→ [Cellular
networks]
2
Turn OFF [Data enabled]
3
Check the content and [OK]
◆ Setting access point (APN)
Access point for connecting to the Internet (sp-mode) is
already registered. You can add and change access points if
necessary.
For details on sp-mode, refer to NTT DOCOMO website.
For using mopera U, Business mopera Internet, add the access
point manually.
For details on mopera U, refer to mopera U website.
･ When Tethering is set to on, access point setting is
unavailable.→P114
❖ Checking the access point in use
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
→ [Cellular
networks]
→ [Access Point Names]
❖ Adding an access point
･ Do not change the MCC/MNC to other than 440/10. The
setting disappears from the screen.
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
→ [Cellular
networks]
→ [Access Point Names]
Data communication/Airplane
mode