User's Manual

Settings
115
❖ Easy settings for Wi-Fi tethering
Register Wi-Fi device supporting AOSS  or WPS.
･ Set Wi-Fi tethering to ON in advance.
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
→ [Tethering]
→ [Easy settings for Wi-Fi tethering]
2
Select a registration method
AOSS  system : [AOSS system] → Perform necessary
operations on the Wi-Fi device
→ On the registration
screen, [OK]
WPS system : [WPS system] → [Push button system]/[PIN
entry system]
→ Set required items → On the
registration screen, [OK]
･ In case of push button method, press a dedicated button
on the Wi-Fi devices. In case of PIN entry method, enter
PIN code displayed on the Wi-Fi device and tap [OK].
✔ INFORMATION
･ When number of AOSS  registration devices exceeds 24, a
confirmation screen for deleting old registration appears. To
use AOSS
 connection with new device, tap [Yes].
･ To cancel the AOSS  setting, tap [AOSS OFF] on the [Wi-Fi
hotspot] screen.
･ For some Wi-Fi devices, AOSS  connection may not be
established. If connection is failed, use WPS connection or
connect manually.
❖ Bluetooth tethering
You can connect your Bluetooth devices to the Internet.
･ Up to 5 Bluetooth devices can be connected simultaneously.
･ You need to pair the Bluetooth devices with your terminal
beforehand.→P141
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
→ [Tethering]
2
[Bluetooth tethering]
✔ INFORMATION
･ The terminal supports dial-up connection using the DUN
profile.
→ P141
For settings of the Bluetooth device, refer to the operation
manual of the Bluetooth device.
◆ Airplane mode
When Airplane mode is set, wireless functions of the terminal
(phone, packet communication, Wi-Fi, Miracast, tethering,
Bluetooth function) are disabled. Wi-Fi, Miracast and
Bluetooth function can be manually turned on in Airplane
mode.
1
From the Home screen, → [Settings] → [Data
communication/Airplane mode]
2
Set [Airplane mode] to ON
✔ INFORMATION
･ You can also enable/disable Airplane mode from the phone
options menu displayed by pressing and holding P .