User's Manual

Data communication
143
NFC is an abbreviation for Near Field Communication and a
short range wireless communication method of international
standard defined by ISO (International Organization for
Standardization). You can use a contactless IC card function,
Reader/Writer function, P2P function, etc.
You can send/receive data to/from another NFC compatible
device using NFC function.
･ For notes when holding over the other device, refer to
"Notes when holding over the other device"→P81
◆ Android Beam
Transfer data between the terminal and a Reader/Writer, P2P
equipped terminal.
･ To use Android Beam, set to allow data transfer beforehand.
･ When "Lock NFC/Osaifu-Keitai" is activated, Android Beam
cannot be used.
･ Android Beam cannot be used on some applications.
Available data varies by applications.
･ Data transfer is not guaranteed for all Reader/Writer, P2P
equipped terminals.
1
From the Home screen, → [Settings] → [Useful
tools]
→ [NFC/Osaifu-Keitai Settings]
･ When a password setting screen appears, set a
password.
･ If [Lock NFC/Osaifu-Keitai] is marked, unmark the
checkbox.
2
Mark [Reader/Writer, P2P]
3
[Android Beam] → Tap the button at the upper
right of the screen to turn [Android Beam] on
❖ Transferring content displayed on the
screen
You can transfer content shown on the screen such as
websites, only by holding mark over each other's terminal.
1
Activate each other's Android Beam function
2
Show website, content, etc. to transfer on the
senders terminal
3
Hold mark over each other's terminal
･ When the terminal detects a compatible device,
notification sounds. The screen content on the sender's
terminal is zoomed out and "Touch to beam" appears.
･ When the operation is being performed by the sender
using the shared menu, hold marks over each other
to start transferring automatically.
4
Tap the screen content to transfer
The content shown on the sender's terminal is transferred
to the receiver's terminal.
NFC communication