User's Manual

Appendix/Index
156
■ Phone/Voice call
● Cannot dial by tapping .
Do you set Airplane mode? → P115
● During a voice call, the distant party's voice is hard to
listen to or too loud.
Adjust the listening volume. Turn on Voice clear and Voice
slowing to make the other party's voice easy to
understand.
→ P61
● Calls are not connected (Even when moving, does not
disappear or although radio waves are enough, making/
receiving calls is unavailable).
• Turn the power OFF and ON, or reattach the docomo
nano UIM card.
→ P28 , P32
• Due to the nature of radio waves, making/receiving calls
may be unavailable even when "not out of service area"
or " appears on the display for the radio wave
condition". Move to call again.
• Do you set call restriction such as Call Blocking? → P65
• Have you changed network type (LTE/3G/GSM)? → P149
• Due to the crossing of radio waves, at the crowded
public places, calls/mails are crossed and the
connection status may not be good. Move to other
place or call again at other time.
● The ringtone does not sound.
• Is [Ring volume] in Volumes set to 0? → P103
• Have you activated any of the following functions?
- Manner mode → P104
- Airplane mode
→ P115
• Do you set call restriction such as Call Blocking? → P65
• The followings are set to 0 seconds?
- [Set answer time] in Phone memo
→ P64
- [Ring time settings] in Voice mail service
→ P64
- [Ring time] in Call forwarding service
→ P64
● Calls cannot be made.
• Is the docomo nano UIM card installed in the right
direction?
→ P28
• Do you enter a phone number from City code?
• Do you set Airplane mode? → P115
■ Mail
● Mail is not received automatically.
• Is Emergency mode set → P34
• Sync frequency in Email account settings is set to
[Never].
→ P73
■ Camera
● Photos and videos taken with the camera are blurred.
• Check if clouds or dirt attach to the lens of camera.
• Automatic still image shooting is available in the
camera of the terminal, but you can also focus using the
touch focus function while shooting still images.
→ P86
■ Osaifu-Keitai
● Osaifu-Keitai function is unavailable.
• When Omakase Lock is activated, appears on the
status bar and Osaifu-Keitai functions are unavailable
regardless of the NFC/Osaifu-Keitai lock settings.
• Is Lock NFC/Osaifu-Keitai activated? → P81
• Do you place mark of the terminal over IC card
reader?
→ P80