User's Manual
Contents/Precautions
19
2. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects, change the using
frequency promptly or stop using wireless LAN
function, and contact "General Inquiries" on the last
page of this manual, then consult about treatment for
prevention of the interference (for example, installation
of partitions etc.).
3. If this device generates harmful radio wave
interference against in-plant radio stations for
identification of mobile objects or amateur radio
stations, or if any trouble, contact "General Inquiries"
on the last page of this manual.
Cautions on using 5 GHz devices
Using wireless LAN built-into the terminal in 5.2/5.3 GHz
outside is prohibited by the Radio Law.
Channel numbers and frequency bands available in Japan
are as follows.
･
5.2 GHz band : 5,180 to 5,240 MHz (36, 38, 40, 42, 44, 46,
48 Ch)
･
5.3 GHz band : 5,260 to 5,320 MHz (52, 54, 56, 58, 60, 62,
64 Ch)
･
5.6 GHz band : 5,500 to 5,700 MHz (100, 102, 104, 106,
108, 110, 112, 116, 118, 120, 122, 124, 126, 128, 132, 134,
136, 140 Ch)
◆
FeliCa and NFC reader/writer
・
FeliCa and NFC reader/writer and P2P function of the
terminal uses weak waves requiring no licenses for radio
stations.
・
It uses 13.56 MHz frequency band. When using other
reader/writer or P2P function in your surroundings, keep
the terminal away sufficiently from them. Before using,
confirm that there are no radio stations using the same
frequency band nearby.
・
To use in airplane, confirm with airline company in advance.
Use is limited in some countries.
Confirm regulations of the country/region to use it.
◆
CAUTION
・
Do not use a remodeled terminal. Using a remodeled
terminal violates the Radio Law/Telecommunications
Business Act.
The terminal is compliant with rules on the technical
standard conformance of specified wireless equipment
based on the Radio Law/Telecommunications Business Act,
and as a proof of it, the "Technical Compliance Mark " is
depicted on the electronic nameplate of the terminal. You
can check the electronic nameplate in the terminal as
follows.
From the Home screen, →[Settings]→[Device
management]→[About phone]→[Auth]
If you remodel the terminal by removing its screws, your
certification of technical standard conformance becomes
invalid.
Do not use the terminal with its certification of technical
standard conformance invalid as it violates the Radio Law/
Telecommunications Business Act.