User's Manual

Before using the terminal
32
b With the side engraved with "B" facing up, insert the
microUSB plug of the AC adapter horizontally into the
external connection jack
c Insert the AC adapter's power plug into an outlet
･ The indicator LED on the terminal lights up red while
charging, and turns off when charging is complete.
･ The indicator LED on the AC adapter lights up green
when the battery can be charged properly.
d When charging is complete, remove the AC adapter's
power plug from the outlet
e Pull out the microUSB plug of the AC adapter horizontally
from the terminal, and securely close the external
connection jack on the terminal
→ P22
◆ Charging with a PC
You can charge the terminal via a PC using microUSB
connection cable 01 (optional) etc.
･ When a screen of new hardware detection or operation
selection appears on the PC, select [キャンセル (Cancel)].
◆ Turning power on
1
Press and hold P (2 sec. or more) until the
indicator LED lights in green
The terminal vibrates and the lock screen appears
following the startup screen.
･ For the first activation, make initial settings. → P40
2
Unlock the screen lock
･ For unlocking method for screen lock, refer to
"Unlocking screen lock".→P46
◆ Turning power off
1
Press and hold P until the phone options menu
appears
2
[Power off] → [OK]
The terminal turns off vibrating.
Turning power on/off