User's Manual

Before using the terminal
34
❖ Pinch
Touch the screen with two fingers and widen (pinch-out) or
narrow (pinch-in) the fingers distance.
❖ Flick
Touch the screen and sweep the finger quickly.
◆ Switching the portrait/landscape view
The terminal supports a motion sensor that senses orientation
or motion of the terminal. You can switch display view by
tilting the terminal vertical or horizontal (Auto-rotate screen→
P105).
･ Even when you change the orientation of the terminal, the
screen may not change depending on the screen displayed.
･ Lock the screen to the direction you look when it rotates
automatically by changing your posture holding the
terminal (Shake to unrotate→P105).
◆ Screenshot
You can save a screen displayed on the terminal as an image.
･ Some screens may not be saved.
1
Press and hold P and volume down key at the
same time (1 sec. or more)
Screen shot is saved and appears on the status bar.
･ Flick the status bar downward to open the Notification
panel. (→P45) To check the image, open the
Notification panel and tap a notification for screenshot
→Select an application, or from the Home screen, tap
→[Gallery]→[Screenshots].
◆ Emergency mode
In case of emergency such as disaster, reduce the battery
consumption by restricting the screen brightness or turning off
functions.
1
Press and hold P until the phone options menu
appears
2
[Emergency mode] → [OK]
The terminal restarts and Emergency mode is set.
･ To cancel the setting, perform the same operations
again or from the Home screen for Emergency mode,
tap [Emergency mode]→[OK].
✔ INFORMATION
･ Alternatively, from the Home screen, tap → [Disaster kit] →
→
[OK] for setting Emergency mode.
･ In Emergency mode, the setting is not canceled by turning
the power off.