Manualshelf

Server User Manual

ManualsBrandsFujitsu ManualsServerM10-4
381382383384385386387388389390
A
Note -
Place the removed fan backplane on a grounded antistatic ESD mat.
Figure 22-7
Removing the screws and bracket
8.
Remove the fan backplane.
22.5 Installing the Fan Backplane
This section describes the procedure for installing the fan backplane.
22.5.1 Installing the fan backplane
1.
Fit the fan backplane into the right- and left-hand notches in the fan shelf.
2.
Install the bracket of the fan backplane and secure it with two screws.
3.
Connect the two cables to the fan backplane.
4.
Support the fan shelf from below with one hand and then insert it carefully
into the chassis.
Arranging the cables in the center makes it easier to install the fan shelf.
5.
Tighten the three screws securing the fan shelf.
Chapter 22 Maintaining the Fan Backplane of the Crossbar Box 365