Server User Manual

XSCF>
showdomainstatus -p 0
Logical Domain Name Status
primary Solaris running
4S-159-D0-G0 Solaris running
4S-159-D0-G1 Solaris running
4S-159-D0-G2 Solaris running
XSCF>
showboards -a
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------
00-000(00) AssignedyyyPassedNormal
01-000(01) AssignedyyyPassedNormal
XSCF>
poweroff -p 0
PPAR-IDs to power off:00
Continue? [y|n] :
y
00 : Powering off
XSCF>
showpparstatus -p 0
PPAR-ID PPAR Status
00 Powered Off
6.
Execute the show boards command to check the state of the chassis requiring
maintenance.
The BB-ID of the chassis requiring maintenance is indicated by the system board
(PSB) number.
In the following example, we can see that [PPAR-ID] of PSB 01-0 is "00".
7.
Execute the pow eroff command to stop all the logical domains on the
physical partition requiring maintenance.
In response to the confirmation message, enter "y".
8.
Execute the showpparstatus command to confirm that the power to the
physical partition is turned off.
In the following example, [PPAR Status] of PPAR-ID 00 displays "Powered Off",
which indicates that the power to the physical partition has been turned off.
9.
Switch the mode switches for the master chassis and those chassis whose
XSCFs are in the standby state to Service mode.
-
For a building block configuration (without crossbar box)
Switch the mode switches of BB-ID#00 and #01 to Service mode.
-
For a building block configuration (with crossbar box)
Switch the mode switches of BB-ID#80 and #81 to Service mode.
Chapter 5 Understanding the Prep arations for Enabling Maintenance 61