answers 2 Technisches Handbuch / Technical Manual Mainboard D1544 Deutsch / English
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Weitere Informationen finden Sie im Handbuch "Sicherheit" und "Ergonomie". Aktuelle Informationen und Updates zu unseren Mainboards finden Sie im Internet: http://www.fujitsu-siemens.com Are there ... ...
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.
Deutsch English Mainboard D1544 Technisches Handbuch Technical Manual Ausgabe April 2003 April 2003 edition
Intel, Pentium und Celeron sind eingetragene Warenzeichen der Intel Corporation, USA. Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft Corporation. PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines, Inc. Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber und werden als geschützt anerkannt.
Übersicht/Overview Mainboard D1544 Interne Anschlüsse und Steckplätze / Internal connectors and slots 1 2 3 DIMM 2 DIMM 1 CPU Pentium4 4 5 6 7 8 9 10 11 PCI 15 14 1= 2= 3= 4= 5= 6= 7= 8= 9= 13 12 Stromversorgung Prozessor / Power supply processor Lüfter Prozessor / Fan processor IDE-Laufwerke 3/4 / IDE drives 3/4 Bedienfeld / Front panel Gehäuseöffnung / Intrusion Diskettenlaufwerk / Floppy disk drive Stromversorgung / Power supply USB C/D (SmartCard) IDE-Laufwerke 1/2 / IDE drives 1/2 10 = 11 =
Contents Übersicht/Overview Mainboard D1544 Mainboard D1544 .............................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes..................................................................................................................................2 Information about boards ..................
Mainboard D1544 Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard. Further information Additional descriptions (e. g. of the drivers) are contained: • • • in the readme files on your hard disk on the driver floppy disks included on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".
Important notes Important notes With the mainboard installed you must open the system to access the mainboard. How to dismantle and reassemble the system is described in the operating manual accompanying the system. Connecting cables for peripherals must be adequately shielded to avoid interference. ! Observe the safety notes in the operating manual of your system. Incorrect replacement of the lithium battery may lead to a risk of explosion.
List of features List of features Onboard features D1544 Chipset i845G/GV Board size 218,6 mm x 230 mm VGA ! Audio Buzzer / int. Speaker Support -/! LAN / with Alert-on-LAN !/! IDE RAID TM FireWire / 1394 / i.LINK ® HI-SPEED USB 2.0 SmartCard Reader Support (USB / serial) ! /- Temperature monitoring ! System Monitoring ! Fujitsu Siemens Computers Keyboard Power Button Support ! Internal ports DIMM slots (DDR 266 SDRAM) 2 AGP Slot (4/8x, 32 bit, 66 MHz, 1.
List of features External ports VGA D1544 1 Audio Mic. in / Line in / Line out / Speaker out 1/1/1/1 Game/MIDI - LAN (RJ-45) 1 PS/2 mouse/keyboard 1/1 USB Ports (2.0, ~480 MB/s) 4 Serial Ports (FIFO, 16550 compatible) 1 Parallel Port (EPP/ECP) 1 * for use with internal devices or optional Front or Rear panel ** not supported by standard power supplies Special features Your mainboard is available in different configuration levels.
List of features DeskView / DeskViewOEM The network-capable manageability software DeskView/DeskViewOEM mainly consists of three modules: • • • DeskInfo shows the most important device data of the PCs in a network (local and/or on an administrator PC). DeskAlert monitors the operability of all major components and triggers alarms if necessary depending on the mainboard variant. DeskFlash carries out a BIOS update under Windows.
External ports Interfaces and connectors The positions of the interfaces and connectors are shown on page "Cover". The components and connectors marked are not necessarily present on the mainboard. External ports The positions of the external ports are shown on page "Cover".
Internal ports and connectors Graphics port - Supported screen resolutions Depending on the operating system used, the screen resolutions in the following table refer to the mainboard screen controller. If you are using an external screen controller, you will find details of supported screen resolutions in the operating manual or technical manual supplied with the controller.
Add-on modules / Upgrading ! Exit energy-saving mode, switch off the system and remove the power plug from the mains outlet, before carrying out any of the procedures described in this chapter! Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI extension boards) are still supplied with power. Replacing processor Technical data • • Pentium 4 with 400/533 MHz Front Side Bus in the mPGA478 design up to 2.
Add-on modules / Upgrading Mounting heat sink Be sure to use heat conducting material between the processor and the heat sink. If a heat conducting pad (rubber-like foil) is already applied to the heat sink, then use it. Otherwise you must apply a very thin layer of heat conducting paste. Heat conducting pads can only be used once. If you remove the heat sink, you must clean it and apply new heat conducting paste before you remount it.
Add-on modules / Upgrading Upgrading main memory Technical data Technology: DDR 266 unbuffered DIMM modules 184-Pin; 2.5 V; 64 Bit, no ECC Size: 128 Mbytes to 1 Gbyte DDR 266 SDRAM Granularity: 128, 256 or 512 Mbyte for one socket At least one memory module must be installed. You may only use up to two double-sided or two single-sided memory modules for DDR 266. Memory modules with different memory capacities can be combined. ! You may only use unbuffered 2,5 V memory modules.
Add-on modules / Upgrading Removing a memory module 1 1 Ê Ê Push the clips on the right and left of the compartment outward (1). Carefully remove the memory module from the compartment (2). Adding PCI cards Technical data: 32 bit / 33 MHz PCI slots 5 V and 3.3 V supply voltage 3.3 V auxiliary voltage PCI bus interrupts - Selecting correct PCI slot i To achieve optimum stability, performance and compatibility, avoid the multiple use of ISA IRQs or PCI IRQ Lines (IRQ sharing).
Add-on modules / Upgrading Monofunctional expansions cards: Standard AGP and PCI expansion cards require a maximum of one interrupt, which is called the PCI interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot. Multifunctional expansion cards or expansion cards with integrated PCI-PCI bridge: These expansion cards require up to four PCI interrupts: INT A, INT B, INT C, INT D.
Add-on modules / Upgrading Replacing the lithium battery In order to permanently save the system information, a lithium battery is installed to provide the CMOS-memory with a current. A corresponding error message notifies the user when the charge is too low or the battery is empty. The lithium battery must then be replaced.
Add-on modules / Upgrading Glossary The technical terms and abbreviations given below represent only a selection of the full list of common technical terms and abbreviations. Not all technical terms and abbreviations listed here are valid for the described mainboard.
