Water Dispenser User Manual

C141-E124-01EN 3 - 123
The microcode or control information is written to the logical unit buffer starting at the location
specified by the BUFFER Address field. If the IDD is unable to accept the specified buffer offset,
it shall return CHECK CONDITION status and it shall set the sense key to ILLEGAL REQUEST
[=5] with an additional sense code of INVALID FIELD IN CDB [=24-00].
(8) Mode = 1, 0, 1, 0 : Echo buffer
In this mode the IDD transfers data from the INIT and stores it in the echo buffer. The BUFFER
ID and BUFFER OFFSET fields are ignored in this mode.