Power Supply User's Manual

MB3887

■

USAGE PRECAUTIONS

• Printed circuit board ground lines should be set up with consideration for common impedance.

• Take appropriate static electricity measures.

• Containers for semiconductor materials should have anti-static protection or be made of conductive material.

• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.

• Work platforms, tools, and instruments should be properly grounded.

• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.

• Do not apply negative voltages.

• The use of negative voltages below −0.3 V may create parasitic transistors on LSI lines, which can cause

malfunction.

■

ORDERING INFORMATION

Part number Package Remarks

MB3887PFV

24-pin plastic SSOP

(FPT-24P-M03)