Owners manual

126
5.2 How to check and reset the Consumable/Cleaning Counter
■ Consumable/Cleaning message
The following message may appear while using the scanner:
Replace the consumable or clean the scanner when this message is sisplayed.
After clicking the [Ignore] button, this message will disappear and scanning will continue.
Replace the consumable as soon as possible.
To stop scanning and replace the consumable, click the [Cancel] button.
For the replacement of consumables, refer to the following sections.
For the scanner cleaning, refer to “4 DAILY CARE” on page 105.
Pad:
“5.3 Replacing the Pad” on page 127
Pick rollers:
“5.4 Replacing the Pick Roller” on page 128
Separator rollers:
“5.5 Replacing the Separator Rollers” on page 130
Brake roller:
“5.6 Replacing the Brake Roller” on page 133
Consumable message:
Cleaning message: