Owners manual

209
8.14 Life counter setting
8
SCANNER SETTINGS
8.14 Life counter setting
This counter specifies the page count to ask operator to replace the consumable.
The background color of the counter on
page 126 changes to yellow when the sheet count exceeds the
value specified here. A message that prompts consumable replacement may also appear as described in
Section
“5.2 How to check and reset the Consumable/Cleaning Counter” on page 123.
1. Start up the Software Operation Panel.
Refer to “8.1 Scanner Settings” on page 175.
2. Select [Device Setting 2] from left side list in the window, and select [Life
Counter Alarm Setting] from its lower level.
3. Specify the counter value to change its color for each consumable (Pick
roller, Brake roller, Separartion pad, separator roller).
Setting is available from 10,000 to 2,550,000 with 10,000 increment.