Owners manual

Index
Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Contents
TOP
181
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Replacing
Consumables
Scanner
Overview
Operational
Settings
Maintenance and
Inspection Cycle
Specify the cycle for scanner
maintenance and inspection to be
performed by a service engineer.
When the specified time period
elapses since the last periodical
maintenance and inspection, a
message for periodical maintenance
appears.
Disable / Enable
Maintenance/Inspection cycle: 1 to 12
months
Disable
33
Multi dropout
colors
Specify a color to be dropped out
from the scanned image (black &
white/grayscale mode only). You
can select any color(s) to drop out in
[Multi dropout colors].
Note that priority is given to the
scanner driver setting if any dropout
color has been specified in the
scanner driver’s setup dialog box.
Use driver settings / Custom Use driver
settings
-
3
Overscan Control Outputs the image in the optimum
position when the image is partially
missing due to a large skew.
Normal / Optimize
Black frame thickness: Thin (Default) to
Thick (level 1 to 3)
Normal
3
-
Item Description Setting/Value Factory Default SCSI or USB
Connector 1
SCSI or USB
Connector 2
3: Configurable
-: Not configurable