User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
15
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
This section explains how to power on/off the scanner.
How to Turn the Power ON
Normally, when the following cables are connected, the
scanner is turned on/off in sync with the computer's power.
z USB cable
z Power cable or USB bus power cable
When the computer is turned on, the scanner is turned on and
the power LED lights in green.
1.3 Turning the Power ON/OFF
Power LED
ATTENTION
z If the scanner is not turned on when the computer is turned on, press
the [Power] or [Scan] button to turn on the scanner.
z If the power LED does not light up while the computer is turned on,
press the [Power] or [Scan] button to turn on the scanner.
[Power] button
[Scan] button