User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Chapter 4 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
31
How to Scan
Documents
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
5 Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
6 Attach the document cover.
7 Close the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
17).
Do not look directly into the light source.
ATTENTION
Do not move the document during scanning.