User Guide

Chapter 5 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
37
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Troubleshooting
Scanner
Overview
Daily Care
Operational
Settings
The inside of the scanner should be cleaned with a piece of
cloth moistened with Cleaner F1, or a sheet of Cleaning Wipe.
1 Open the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
17).
2 Clean the following locations with a cloth moistened with
Cleaner F1 or a sheet of Cleaning Wipe.
3 Wait for the cleaned parts to dry.
4 Close the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
17).
5.3 Cleaning the Inside
ATTENTION
z To avoid deformation and discoloration, never use paint thinner or
any other organic solvents.
z Be careful not to let any moisture or water inside the scanner during
cleaning.
z It may take a long time to dry if an excessive amount of Cleaner F1 is
used. Use it in small quantity. Wipe off the cleaner completely to
leave no residue on the cleaned parts.
ATTENTION
Be careful not to let the cleaner in between the document bed and
the plastic frame.
Plastic frame
Document
bed
Document pad