User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Appendix
Chapter 6 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
49
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Operational
Settings
Scanner
Overview
Troubleshooting
A shadow appears at the top or the bottom of the
scanned image.
Did you use the Page Edge Filler function to fill out the
shadow around the edge?
No
In the scanner driver, use the Page Edge Filler function to fill out the shadow
around the edge.
Yes
If the problem persists, check the items in "6.2 Before You Contact the Scanner
Service Provider" (page 52) first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.