ページ 2006年9月6日 水曜日 午後2時36分 USER’S MANUAL WIDE PLASMA DISPLAY P42HTA51E SERIES P50XTA51E SERIES Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see the separate "Safety Precautions" manual). Keep this manual where the user can see it easily. * Installation and removal require special expertise.
01_E_7473.book 2 ページ 2006年9月6日 水曜日 午後2時36分 CONTENTS INFORMATION ................................................................E-3 ACCESSORIES ....................................................................E-4 ATTACHING THE FERRITE CORES ...................................E-4 INSTALLATION ...............................................................E-5 PART NAMES AND FUNCTIONS ...................................E-6 DISPLAY SECTION – FRONT .............................................
01_E_7473.book 3 ページ 2006年9月6日 水曜日 午後2時36分 English INFORMATION • Receptacle • Have the plasma display inspected and cleaned by your dealer at regular intervals. • Do not display the same picture for a long time, because part of the screen may “burn-in” and create a residual image if the same picture is displayed for an extended period of time. To prolong the life of the plasma display, we recommend the use of the “Screen Orbiter” settings. (See P.
01_E_7473.book 4 ページ 2006年9月6日 水曜日 午後2時36分 INFORMATION (Continued) ACCESSORIES Safety Precautions This manual Manual Remote control AA battery (2) Power cable Spacer (4) Manual Large ferrite core Small ferrite core (2) ATTACHING THE FERRITE CORES Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model.
01_E_7473.book 5 ページ 2006年9月6日 水曜日 午後2時36分 English INSTALLATION • Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation. • See the appropriate instruction manual for additional information on the mounting hardware you select. Deutsch • To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated location.
01_E_7473.book 6 ページ 2006年9月6日 水曜日 午後2時36分 PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Input mode selection button Switches the input modes (Video mode, RGB mode and TV mode). Volume button Adjusts the sound volume. Wide screen selection button Switches the screen over to a desired wide screen. Power indicator lamp This lamp shows the state of the power supply.
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book Español Deutsch DISPLAY SECTION – BOTTOM /I power switch Français If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
01_E_7473.book 8 ページ 2006年9月6日 水曜日 午後2時36分 PART NAMES AND FUNCTIONS (Continued) REMOTE CONTROL For details, see page Î. (POWER button) Î E-12 Switches between Power On and Standby. (WIDE button) Î E-16 Press to switch the screen size. (TV input mode selector button) Î E-13 Press to watch terrestrial broadcastings. (Video input mode selector button) Î E-14 Press to switch through VIDEO1 to VIDEO5. (RGB input mode selector button) Î E-15 Press to switch through RGB1. .
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book < (ENTER button) Î E-18–E-29 $ Deutsch Press to fix the entry in the ADJUSTMENT MENU. G (DUAL/STEREO button) Î E-15 Press to select the audio mode for stereo/dual-channel audio broadcasting. % KLMN (COLOR button) Î E-14 In the teletext broadcasting, press these buttons to switch through the pages stored to each of the four colors in the LIST mode.
01_E_7473.book 10 ページ 2006年9月6日 水曜日 午後2時36分 USING THE REMOTE CONTROL PUTTING BATTERIES IN THE REMOTE CONTROL (1) To remove the cover, slide it outwards while pressing it down. (2) Place two AA batteries in the remote control. Make sure that the batteries are properly oriented. (3) Close the cover until it snaps into place. PRECAUTIONS To prevent malfunction, do not apply any form of severe shock to the remote control.
ページ 2006年9月6日 水曜日 午後2時36分 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT English 01_E_7473.book • Connects to the antenna input terminal on the display bottom. • Connect the video signal cable to the component video input terminal, HDMI input terminal, S-video input terminal, or the video input terminal. • If the component to be connected is equipped with HDMI output terminal or the component video output terminal, connection to either of these terminals is recommended.
01_E_7473.book 12 ページ 2006年9月6日 水曜日 午後2時36分 BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY 1 Press OFF/ON to the left at the bottom of the display to the STDBY state. The power lamp lights up. 2 Press 3 Press press on the remote control. The color of the power lamp changes from “Red” to “Green”. , the button of the channel you want to watch, and then or . Select TV or the picture mode to input. 4 Press when the power is ON.
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book 1 Deutsch WATCHING A TV BROADCASTING Select the country. Select the country using the Auto Store function in the CHANNEL SETTING menu (see page E-26). 2 Press Español This enable the terrestrial broadcastings to be watched for selected country. . Available to watch the terrestrial broadcastings. The last Program No. that you watched is received. Select the Program No. Press Français 3 – .
01_E_7473.book 14 ページ 2006年9月6日 水曜日 午後2時36分 BASIC OPERATIONS (Continued) WATCHING A TELETEXT BROADCASTINGS 1 2 Display the TV program. to set to TV mode. Press .. Press This enables teletext broadcasts to be viewed. (superimposed over the TV program) The teletext broadcasting INDEX screen is received. . is pressed, the screen switches between teletext screen superimposed over the * Whenever TV program and teletext-only screen. • Displays the teletext page program.
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book 1 Press Deutsch RGB INPUT MODE to select the input mode. The input terminal of RGB mode is as follows. RGB1 mode Italiano Français * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-25. Español • RGB1: mD-sub CONVENIENT FUNCTIONS DISPLAY 3 . Press The channel or mode is indicated on the screen for 5 seconds. PICTURE MODE 4 Press . This button can be used to switch the picture mode.
01_E_7473.book 16 ページ 2006年9月6日 水曜日 午後2時36分 WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES 1 Press 2 Press Size. . The currently selected mode will appear. to select a desired Screen Each time you press , a different Screen Size appears.
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book Normal (Video/RGB) Displays pictures of normal size (i.e., a 4:3 aspect ratio). Wide1 (Video) Displays natural-looking pictures of standard size on the wide screen.
01_E_7473.book 18 ページ 2006年9月6日 水曜日 午後2時36分 ADJUSTMENT MENU The numbers in parentheses ( ) indicate the reference page numbers. PICTURE (E-19) Signal Contrast MENU (E-20) Drive Contrast (E-20) Brightness (E-20) Color (E-20) Tint (E-20) Sharpness (E-20) Ambient Sensor (E-20) Picture Mode (E-20) Color Temp.
ページ 2006年9月6日 水曜日 午後2時36分 BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS English 01_E_7473.book 1 Press 2 Press ;. The main menu screen will appear. Español E or F to select “PICTURE”. Each time you press E or F, one of the available menus appears in the following sequence: The PICTURE Menu screen will appear. Press C or D to select “Tint”. Press <.
01_E_7473.book 20 ページ 2006年9月6日 水曜日 午後2時36分 ADJUSTING THE PICTURE • Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-19 for the basic operation procedures. Signal Contrast Press F to increase the input signal contrast. Press E to reduce the input signal contrast. Press < to store. Drive Contrast Press F to raise the display’s luminance level, and increase the contrast.
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book Color Temp. Deutsch “Color Temperature” can be set. Each time E or F is pressed, the color temperature mode is switched as shown below. < Warm < Standard < Cool < [Warm]: More reddish colors More bluish colors Español Press < to store.
01_E_7473.book 22 ページ 2006年9月6日 水曜日 午後2時36分 ADJUSTING SCREEN POSITION AND SIZE • You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page E-19 for the basic operation procedures. • The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes. POSITION/SIZE Menu screen Screen Position Horizontal position (Horizontal) F: Moves screen to the right. E: Moves screen to the left.
01_E_7473.book 23 ページ 2006年9月6日 水曜日 午後2時36分 English ADJUSTING AUDIO • The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes. • When the optional speaker is not installed, sound is not output. Deutsch • You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-19 for the basic operation procedures. Treble Español Press EF to make adjustments.
01_E_7473.book 24 ページ 2006年9月6日 水曜日 午後2時36分 OTHER ADJUSTMENTS FEATURES setup screen has the following 5 options. See Page E-19 for the basic operation procedures. [Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. [On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-24.) [Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-25.) [Channel Setting]: Can make channel settings. (See P. E-26.
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book Name Selection (Name Select) Deutsch You can change the settings for indications for video inputs and RGB inputs. Video input You can change the settings for indications for the VIDEO inputs. Select the desired indication in accordance with the connected equipment. E F is pressed, the setting is switched.
01_E_7473.book 26 ページ 2006年9月6日 水曜日 午後2時36分 OTHER ADJUSTMENTS (Continued) CHANNEL SETTING Press C or D to select the items for setting. It is switched as shown as below. Auto Store < Manual Store < Sort Press < to proceed to the next step. Auto Store Press E or F to select the country or region, and then press <. All the channels are scanned, and only the channels that can be received are assigned to the Program Nos. * Several minutes are required to scan all the channels.
ページ 2006年9月6日 水曜日 午後2時36分 English 01_E_7473.book Screen Orbiter for RGB You can use this option to move the screen position to minimize phosphor-induced “burn-in”. Follow the steps below. (1) Select “Screen Orbiter” and press <. The “Screen Orbiter” setting screen will appear. (2) Press C or D to select “Mode/Time”. (3) Select a desired pattern.
01_E_7473.book 28 ページ 2006年9月6日 水曜日 午後2時36分 OTHER ADJUSTMENTS (Continued) (6) Press < to store. * When the Screen Orbiter function is operated, some letters at the top, bottom, right or left of the screen may be missed. Direct Setting for RGB You can use this option to switch the setting for RGB input signal.
ページ 2006年9月6日 水曜日 午後2時36分 INITIALIZATION OF USER ADJUSTMENT VALUE English 01_E_7473.book Press 2 Press or DEFAULT”. ;. Español The main menu screen will appear. E F to select “FACTORY PICTURE < POSITION/SIZE < AUDIO < FEATURES < FACTORY DEFAULT “FACTORY DEFAULT” selected in the main menu screen Français Each time you press E or F, one of the available menus appears in the following sequence: The FACTORY DEFAULT Menu screen will appear. 3 Press <.
01_E_7473.book 30 ページ 2006年9月6日 水曜日 午後2時36分 OPTIONS Wall-mounting Bracket 0° to 15° mounting angle P-WB4201 (for 42” model/50” model) Ceiling unit 5° to 25° mounting angle P-CT4200 (for 42” model/50” model) Frame To install this plasma display with the wall-mounting bracket or the ceiling unit , install the accessory spacers between the plasma display and frame as shown in the figure at right.
01_E_7473.book 31 ページ 2006年9月6日 水曜日 午後2時36分 English MAIN SUPPORTED SIGNALS To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-22 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected. Deutsch This display can store the latest four types of signals for RGB adjustment value.
01_E_7473.book 32 ページ 2006年9月6日 水曜日 午後2時36分 TABLE OF TV FREQUENCIES Frequency (MHz) 551.25 559.25 567.25 575.25 583.25 591.25 599.25 607.25 615.25 623.25 631.25 639.25 647.25 655.25 663.25 671.25 679.25 687.25 695.25 703.25 711.25 719.25 727.25 735.25 743.25 751.25 759.25 767.25 775.25 783.25 791.25 799.25 807.25 815.25 823.25 831.25 839.25 847.25 855.25 Frequency (MHz) 53.75 62.25 82.25 105.25 112.25 119.25 126.25 133.25 140.25 147.25 154.25 161.25 168.25 175.25 183.75 192.25 201.25 210.25 217.
01_E_7473.book 33 ページ 2006年9月6日 水曜日 午後2時36分 English SPECIFICATIONS WIDE PLASMA DISPLAY Power supply Current rating External equipment terminals Antenna input terminal Video input terminals PC input terminal Audio terminals External speaker output terminal Operating conditions Accessories Deutsch Español 16:9 (wide) 1024 (H) x 1080 (V) 31.5 kg / 69.4 lbs 103.9 (W) x 64.0 (H) x 8.7 (D) cm 40.9 (W) x 25.2 (H) x 3.4 (D) inch (does not include outer projections) 110-240 VAC 50/60 Hz 4.05-1.
01_E_7473.book 34 ページ 2006年9月6日 水曜日 午後2時36分 CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections. Cleaning the Screen Clean the screen gently with a soft cloth.