Server User Manual

The device is mounted in a rack using a rack mounting kit (supplied with the PRIMEQUEST 1000 series server).
Therefore, the following conditions regarding distance must be satisfied. One condition is the allowable spacing
between posts. The second condition is the length from the inside of the front cover to the front surface of the front
rack posts. The third condition is the length from the front surface of the front rack posts to the inside of the rear
cover.
FIGURE A.6 Conditions of rack depth
Conditions regarding rack posts
PRIMEQUEST 1000 Series Hardware Installation Manual
APPENDIX A Racks
58 C122-H004-07EN