Server User Manual

U41243-J-Z156-1-76 65
Configuration software and utilities BIOS Setup
5.3.6.2 Server Management Information submenu
This submenu displays the system serial numbers, system part number, and
server management controller revisions. No changes can be made in this menu
in user mode. If you want to make changes, please consult your system admin-
istrator.
5.3.6.3 Console Redirection submenu
Menu item Description
Board Part Number For information only
Board Serial Number For information only
System Part Number For information only
System Serial Number For information only
Chassis Part Number For information only
Chassis Serial Number For information only
BMC Revision For information only
FPC Revision For information only
HSC Revision For information only
Table 19: Server Management information
Menu item Option Description
COM Port
Address
Disabled
3F8
2F8
3E8
Selects the address of the serial port. Make
sure that these values are identical to those of
serial ports A and B in the I/O Device Configu-
ration submenu.
IRQ # 3 or 4 When enabled, the displayed IRQ is used.
COM Port
Baud Rate
9600
19 200 K
38 400 K
115 200 K
Selects the transfer rate in bits/s.
Flow Control Selects data flow control.
No Flow Control No flow control.
CTS/RTS Controlled by the hardware.
XON/XOFF Controlled by the software.
CTS/RTS+CD Controlled by the hardware with carrier detect
for modem use.
Table 20: Console Redirection options