DL3750+ DOT MATRIX PRINTER PARTS CATALOGUE FUJITSU ISOTEC LIMITED
REVISION RECORD Edition Date published 01 February 2004 Page Revised contents First issue Specification No. P3KA02008-B001/E The contents of this manual may be revised without prior notice. All Rights Reserved, Copyright © 2004 FUJITSU ISOTEC LIMITED. Address your comments and inquiries on this manual to: This document is used for maintenance purpose only. The illustration of the part does not guarantee its availability.
This is parts catalogue for the DL3750+ DOT MATRIX PRINTER. This manual is for service engineers. There are several models of DL3750+ DOT MATRIX PRINTER. This manual covers all models. This manual consists of two parts : Parts List and Parts Drawings. Parts list has layer structure .You can find assembly levels. Parts drawing does not have the layer structure. You can see the model difference from the parts list easily. There are other manuals for service engineers as follows.
CONTENTS 1. HOW TO REFER TO THIS MANUAL………………………………………………………………1-1 2. SPECIFICATIONS……………………………………………………………………………………..2-1 3. PARTS LIST AND PARTS DRAWING OF PRINTER MECHANISM…………………………….3-1 3.1 DL3750+ Printer…………………………………………………………………………………….3-1 3.2 Upper Cover Assembly……………………………………………………………………………..3-5 3.3 Lower Cover Assembly……………………………………………………………………………..3-7 3.4 Mechanism Assembly……………………………………………………………………………….3-9 3.5 Paper Unit Assembly……………………………………………………………………………….3-11 3.
1. HOW TO REFER TO THIS MANUAL Example: Composition & Quantity 1 No.
2. SPECIFICATION The table below lists standard models of the DL3750+ printer. Voltage No.
2.1 UNIT CONSTRUCTION TABLE The table below lists standard models of the DL3750+ printer. No. Specification AC Cord User’s manual Ribbon Cassette CA02374- Lower C. Assembly KA02008- Upper C.
3.PARTS LIST AND PARTS DRAWING OF PRINTER MECHANISM 3.
3.1 DL3750+ Printer No.
3.
3.1 DL3750+ Printer(continued) No.
3.
3.2 Upper Cover Assembly No.
3.
3.3 Lower Cover Assembly No.
3.
3.4 Mechanism Assembly No.
3.
3.5 Paper Unit Assembly No.
3.
3.6 Carrier Unit Assembly No.