Installation guide

28 Operating Manual RX300 S7
Functional overview
Slots
Drive bays
LAN Controller Intel Ethernet Controller I350, 2 x 10/100/1000
Mbit/s Ethernet (I/O acceleration), in addition
2 x 1 Gbit/s as default.
Modular On-Board LAN with upgrade options to
4 x 1 Gbit/s or 2 x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also
diskless).
Remote Management
Controller
Integrated Remote Management Controller
(iRMC S3, 32 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Trusted Platform
Module (TPM)
Infineon / separate module; TCG V1.2 compliant
(option)
PCI-Express 3.0 x8 5 x low profile
PCI-Express 3.0 x16 2 x low profile (2nd processor required)
Slot notes One PCIe Gen3 x8 slot (slot 1) may be occupied with
a Modular On-Board LAN controller if configured.
This slot is marked with a color-coded connector
(white) and a special LAN sticker on the rear of the
chassis.
One PCIe Gen3 x8 slot may be occupied with a
Modular RAID controller if configured.
Important: 5 PCIe x8 slots are supported with the first
processor. 7 PCIe slots (including 2 PCIe x16) are
supported with two processors.
Hard disk bay
configuration
6x 3.5-inch, for SAS / SATA or
4x 2.5-inch, 8x 2.5-inch, 12x 2.5-inch, 16x 2.5-inch
for SAS/SATA/SSD optional