Installation guide

RX300 S7 Operating Manual 53

Hardware installation

5.3 Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The

additional connectors available on your server depend on the expansion cards

installed. For further information refer to the "PRIMERGY RX300 S7 Server

Upgrade and Maintenance Manual".

Figure 2: Connection panel on the rear

I Some of the devices that can be connected may require the installation

and setting up of special software (e.g. drivers) (see the documentation

for the connected device).

Ê Connect the desired devices to the server.

1 Video connector (blue) 4 Shared LAN connector (LAN 1)

2 Management LAN connector 5 Serial connector COM1*

(turquoise)

3 Standard LAN connector (LAN 2) 6 4 USB connectors (black)

* The serial interface COM1 can be used as the standard interface or for

communication with iRMC S3.

/ 2