PRIMERGY TX300 S5 System configurator and order-information guide October 2009 Contents Instructions Configuration diagram Configurator 0 I II III IV V System Software Basic unit Processor Memory Graphics Accessible drives/ HDD Extension Box M-VI Modular Raid for 3.5" Hard Disks M-VII 3.5" SAS / SATA Hard disk drives N-VI Upgrade-Kit to 2.5" HD Basic Unit N-VII Modular Raid 0/1 and Raid5 Controller for 3.5" Hard Disks + 2.5" HD ext. box N-VIII 2.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/SystemArchitect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Configuration diagram PRIMERGY TX300 S5 System unit ( I ) SIDE VIEW FRONT VIEW 3 x 5.25" bays available 3 x HH 5.25" free or 1. PSU 2 x HH 5,25" free + Option A or 1 x HH 5.25" free + Option C Hot plug power supply 2. PSU 1.6 * 5.25" Redundant power supply option 1.6 * 5.25" LSP/LSD Option 1.6 * 5.25" Slim CD / DVD Slim CD / DVD Memory CPU1 ( Channel A + B + C ) LSP/LSD Option Box 1 1.6 * 5.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Configuration diagram PRIMERGY TX300 S5 System unit ( I ) SIDE VIEW FRONT VIEW 3 x 5.25" bays available 3 x HH 5.25" free or 1. PSU 2 x HH 5.25" free + Option A or 1 x HH 5.25" free + Option D or 0 x HH 5.25" free + Option A + Option D Hot plug power supply 1.6 * 5.25" Redundant power supply option 1.6 * 5.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Start PRIMERGY TX300 S5 SW Configurator 32 bit with OEM-Software Usage of OEM SW from MS is not possible under VMware for PRIMERGY Server without OEM-Software for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Start PRIMERGY TX300 S5 SW Configurator EM64T / IA64 with OEM-Software for PRIMERGY Server Usage of OEM SW from MS is not possible under VMware without OEM-Software for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Start PRIMERGY TX300 S5 I Section SAS - Basic units SAS - System unit, Rack and Floorstand including: * By a key lockable front slider in floorstand version * Basic units with: A.) - 1x 800W Hot-Plug Power Supply (no redundancy) + 3x 120mm Standard Fans (no redundancy) B.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 A Interfaces at the rear: * 1x RS-232-C (serial, 9 pins) (usable for BMC or OS or shared) * 1x RS-232-C (serial, 9 pins) * 1x VGA (15 pins) * 4x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup * 2x LAN RJ45, 1x Service-LAN RJ45 Interfaces on the front: * 3x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup * 1x VGA (15 pins) as an option Interfaces internal: * 2x released internal USB Interfaces for backup devices, * 1x USB 2.
System configurator and order-information guide B PRIMERGY TX300 S5 Floorstand-version S26361-K1267-V101 without CPU and Memory with: - 1 hot plug power supply 800W ( no redundancy ) - Three standard fans ( no redundancy ) - 6-port SAS backplane for 6x 3.5" hot plug SAS or SATA HD`s incl.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Mounting kits for PRIMERGY TX300 S5 - 1 pair of telescopic rails full extraction - 1 Vario carrier DC-PC-3rd party Rack allows toolless adjustable in depth and easy mounting - 1 bracket PRIMECENTER and DataCentre-Racks Mounting kit for mounting of servers in FSC 19" PRIMECENTER- racks and all server racks conforming to EIA standard EIA-310-D for 19" racks.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 D Cables included in basic unit Connections 1. SATA DVD 2. Cable ¡ Key: ¥ 68pins ¡ IDE terminator ¡ Basic unit with 6-port SAS backplane for 6 3.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 E II Section Processor There are 2 processor sockets available. The first socket is always equipped with the first CPU which can be selected via configurator It is also possible to upgrade a dual-processor system later on with a second CPU Two processors with different clock frequencies are not possible A multi-processor operating system is required for a dual-processor system. Note: Max.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 F III Section Memory - There are 9 memory slots for max. 72GB DDR3 RAM per CPU available with 8GB DIMMs => max.
G1 System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 G2 S26361-F3284-E1 S26361-F3284-E2 Spare Channel Mode Installation Performance Mode Installation With this order code a BIOS setup With this order code BIOS setup for spare mode is factory preinstalled is default for highest performance The three identical memory modules The three identical memory modules of following order codes are always of following order codes are always equipped in one memory bank to
H1 System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 H2 S26361-F3284-E3 Mirrored Channel Mode Installation With this order code a BIOS setup for Mirrored Channel Mode is factory preinstalled The two identical memory modules of following order codes are always equipped in one memory bank to use the Mirrored Channel Mode In this mode only one module contains active data, the second modul contains the mirrored data Registered (reg) RDIMMs MM = for "Mirrored Channel Mode" u
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Memory Configuration PRIMERGY TX300 S5 Each CPU offers 9 Slots for DDR3 Memory Modules organised in 3 Banks and 3 Channels. If you need more than 9 Slots you have to configure the 2nd CPU. Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below). For TX300 S5 only registered DDR3 memory modules ( RDIMM ) are available.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Channel E Channel F Bank I Data Data Data (black sockets) Bank II Data Data Data (blue sockets) Bank III Data Data Data (green sockets) 1st XEON CPU (Dual-or Quad Core) Channel D Channel C Channel B Channel A 1.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 J V Section Accessible drives and 3.5" SAS / SATA HDD extension box There are 3 bays (1.6" x 5.25") for accessible drives. S26361-F2826-E204 Mounting Kit DVD(sl) + LSP/LSD Occupies one 5.25" x 1.6" bay in the accessible bay area Offers bays for: - 1x LSD/LSP option - 1x 0.5 * 5.25" SATA DVD max. 1x per system S26361-F2557-E202 Local Service Panel incl. ad. Customer Self Service LSP module incl. adapter 0.5" x 5.
System Configurator and Order-Information Guide PRIMERGY TX300 S5 Status 2009-09-29 K SCSI Controller for internal or external backup drives (External only the PRIMERGY SX10 is released) S26361-F3270-E1 SCSI U320 Controller Adaptec SCSI Card 29320LPE PCIe x1, int: LVD HD68 ext: VHDCI 68pin max. 2x per system ext./int. 2x For internal and external SCSI Backup drives an additional SCSI controller has to be configured For internal SCSI backup drives is one SCSI controller necessary.
System Configurator and Order-Information Guide PRIMERGY TX300 S5 Status 2009-09-29 L SAS Controller for internal Backup Drives S26361-F3257-E4 4 port SAS RAID Controller LSI MegaRAID SAS 1064 RAID 0, 1 & 1E no controller cache SAS 3Gb/sec 4 internal ports PCIe x4, 160mm with combi bracket max.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 M Section M-VI Modular Raid 0/1 and Raid5 Controller for 3.5" Hard Disks For internal 3.
System Configurator and Order-Information Guide PRIMERGY TX300 S5 Status 2009-09-29 M1 M-VII Section 3.5" SAS / SATA Hard disk drives In a basic unit with a 6x 3.5" HD backplane, the remaining 2 SAS ports of the 8-port modular SAS RAID-controllers can be used for additional two SAS or SATA HD`s through the configuration of the 3.5" HD SAS / SATA extension F-D-L-HDD-Box 2 which offers extra two bays for SAS or SATA HD`s Up to 6 or 8 ( with F-D-L-HDD-Box 2 ) 3.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 N Section N-VI Upgrade-Kit to 2.5" HD Basic Unit S26361-F2826-E134 Conversion Option to 2.5" HD Basic Unit Drive Bay with one backplane for up to 12x 2.5" HD slots max. 1x per system Section N-VII Modular Raid 0/1 and Raid5 Controller for 2.5" Hard Disks + 2.5" HD extension box For internal 2.
System Configurator and Order-Information Guide PRIMERGY TX300 S5 Status 2009-09-29 N1 S26361-F2826-E114 SFF (2.5") HDD-Box for additional 8x SFF (2.5") SAS hard disks Occupies 2x 1.6" bays in the accessible bay area 3.2 * 5.25", satin black bezel max. 1x per system Raid 0/1 controller BBU max. 2x per system possible for loose delivery please order S26361-F3257-L110 N-VIII Section see Conf.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 O IX Section External SAS Disk Array, SAS backup drives or SCSI peripheral devices SAS RAID controller for JBOD subsystems 1x S26361-F3890-E1 S26361-F3890-E30 8 port SAS RAID Controller 8 port SAS RAID Controller LSI LSI MegaRAID SAS8880E MegaRAID SAS8880E 512MB Cache with ECC 512MB Cache with ECC iBBU max.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 P X Section Fibre Channel Fibre Channel Controller for external storage systems S26361-F3306-E1 4GBit/s FC Controller Emulex LPe1150, full height bracket 1 channel 4GBit/sec FC Controller LC Interface for 50µm Fiber PCIe x4, 170mm max. 4x per system S26361-F3306-E2 4GBit/s FC Controller Emulex LPe11002, full height bracket 2 channel 4GBit/sec FC Controller LC Interface for 50µm Fiber PCIe x4, 170mm max.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Q XI Section Communication / Network Dual Port GBit on-board LAN Controller Gigabit Ethernet Controller on-board Dual Port GBit LAN controller Intel 82575EB (Zoar) * ext: for RJ 45-connector SW: AFT, VLAN, Fast Channel Teaming: Failover, Load Balancing The Intel LAN Controllers 1000TX and 1000SX can be used with the on-board controller in Teaming Mode. Two onboard LAN ports can likewise educate a team.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 R XII Section System Management Products (RemoteView) S26361-F1790-E241 iRMC S2 advanced pack integrated remote management controller iRMC S2 (integrated Remote Management Controller) onboard server management controller with dedicated 10/100 Service LAN-port and integrated graphics controller.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 S Section XIII Country specific power cord A power cord has to be ordered for country specific floorstand versions: - once per basic unit and additional a second power cord - if an additional hot plug, redundant power supply modul is ordered PRIMERGY TX300 S5 Rack PRIMERGY TX300 S5 Floorstand Power cord for floorstand versions for following countries: 1.
System configurator and order-information guide PRIMERGY TX300 S5 Status 2009-09-29 Change Report Date Order number Changes 2009-07-31 2009-06-17 2009-06-17 2009-06-02 2009-05-31 2009-05-31 2009-04-16 2009-03-31 S26361-F3337-E333 S26361-F3561-E4 S26361-F2748-E533 Added W5590 CPU Added Tape drive LTO3HH Ultrium SAS new graphics card released Slot description changed on Comm. Network page; New order code for 3.5" HDD Box 2 Added E5530 and X5560 CPU Added 3.
