PRIMERGY BX920 S3 System configurator and order-information guide July 2012 Contents Instructions Configuration diagram Configurator 0 # # # # # # # System software X XI XII XIII XIV XV XVI BX920 S3 Dual Socket Processor Memory Storage RAID Functionality 20 iRMC S3, Graphics 25 Mezzanine Cards 26 L LI LII LIII Storage Blades SX910 Tape Blade SX910 SAS Controller SX910 SAS Tape Drive # LIV # LV # LVI 21 22 23 24 XX XXI XXII XXIII XXIV XXV XXVI # # # # # Change report PRIMERGY Server SX940
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 Instructions This document contains basic product and configuration information that will enable you to configure your system via System-Architect. Only the tool "System-Arcitect" will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 Configuration diagram Dual Server Blade BX920 S3 Mezzanine slot 1 CPU1 Row 1 (3 DIMMS) Row 2 (3 DIMMS) Intel CPU First Mezz. card or unpopulated Mezzanine slot 2 CPU2 Row 1 (3 DIMMS) Intel CPU Row 2 (3 DIMMS) upper SAS 2.5" or HDD dummy frame lower SAS 2.5" or HDD dummy frame Disk drives LSI HW Raid Ctrl. Second Mezz.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 D Section X Dual Socket Server Blade BX920 S3 Server Blade with: - Dual INTEL Romley Processor Support as Dual/Quad/Six-Core - The base units with INTEL Processor - 12 DIMM sockets, organized in 2 row (6 DIMM) for CPU1 and 2 row (6 DIMM) for CPU2 - 1x Dual channel 10 Gbit Ethernet CNA controller on-board - Hard disk controller for the 2x SAS/SATA HDD/SSD - 2 bays for 2.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 E XI Section Processor There are 2 processor sockets available. The first socket is always equipped with the first CPU which can be selected via configurator It is also possible to upgrade a dual-processor system later on with a second CPU For the second CPU there are different order numbers, due to the different Heatsink.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 F XII Section Storage Mixed configurations with ECO SATA drives and SAS drives are not allowed Configurations with Eco SATA can only be mixed with BC SATA HDD type All combinations of SSD, BC SATA and SAS are possible - but not in same logical drive (RAID array) Both hard disks are plugged in directly connected to the onboard controller.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 F1 XIII Section RAID Functionality on Server Blade The Dual Server Blade supports different RAID soltutions for internal HDD's 1. PCH based RAID 2. PCH based RAID with SAS upgrade 3. SAS RAID HDD Module with LSI HW RAID w/o cache 4. SAS RAID HDD Module with LSI HW RAID w/ 512 MB Cache and optional FBU Also the SAS BP has to be changed. It is included in the RAID Mezz HDD Connection Kit.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 G XIV Section iRMC S3, Graphics Graphic Controller is part of the onboard Management Controller iRMC S3. Other graphics are not possible. The iRMC S3 advanced pack is included in the system delivery. A corresponding license order is not necessary. XV Section Mezzanine cards for Dual Socket Server Blade The Dual Server Blade supports the following optional mezzanine cards.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 G III Section Memory - There are 6 memory slots per CPU for max. 192GB LRDIMM (6x 32GB 4R) 96GB RDIMM (6x 16GB 2R) 24GB UDIMM (6x 4GB) => max.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 G1 S26361-F3695-E10 Independent Mode Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined Requires min 1 memory Module per CPU S26361-F3695-E1 Rank Sparing Mode Installation BIOS Setup factory preinstalled to this mode. One Rank is spare of other ranks on the same channel. Spare Rank is not shown in System Memory.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 Memory Configuration PRIMERGY BX920 S3 Each CPU offers 6 Slots for DDR3 Memory Modules organised in 2 Banks and 3 Channels. If you need more than 6 Slots you have to configure the 2nd CPU. Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below).
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 Channel C Channel D Channel E Channel F Bank I (black sockets) Bank II (blue sockets) Channel B Channel A 1.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 4.
System configurator and order-information guide PRIMERGY BX920 S3 Status: 2012-06-29 Change Report Date 2012-06-28 2012-06-12 2012-05-29 2012-05-01 Order number S26361-F5225-E*00 Changes corrected text for 2 end Y-Cable New order for SATA SSD´s Added 1333 RDIMM First Release Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 14
